20 Myths About Double Glazed Window Repair: Busted

Double Glazed Window Repair

It's worth looking over the warranty included with most double-glazed windows. Generally, it includes any problems with the window hardware such as hinges and locking mechanisms within the first 10 years.

The mist that forms between the glass windows can be caused by a breach in the seal, and it's something that needs to be repaired quickly to stop damp or mould growing in your home.

Condensation Between the Windows

If condensation appears between your windows, it is an indication that the seal holding in the gas insulating the windows has failed. This can be a serious issue that needs to be dealt with as soon as you can especially in winter when humidity is at its highest. It could also lead to damage to the sills, sealant, and even mildew or mould.

Double-glazed windows should not have condensation between the panes. However, it's not uncommon for extreme humidity or a cold snap to cause this issue. Fortunately, it is fixable without replacing the entire window. A professional can drill tiny holes into the window and spray special cleaning solution inside. The water is then drained from the window. Additionally, an anti-fogger can be installed to stop the build-up of moisture in the future.

Condensation may also occur between windows due to air leakage, or other causes outside the window. In this scenario it could take longer for the moisture inside the window to build up, as the air must be sufficiently warm to evaporate the water molecules. In these instances it is more beneficial to replace double-glazed windows instead of trying to repair the sealed units.

A double-glazed window is constructed from two or three pieces of insulated glass, held together by a frame made of metal. The gap in the middle of the window is filled with a non-toxic gas for insulation like argon or krypton, and then sealed tightly. The seal blocks the insulating gases from leaving and also prevents moisture and air from getting into the gap.

As windows age, the seals will get worse and allow moisture to leak into the gap between the glass panes. It is crucial to recognize when the seals are leaking because it indicates that the double glazing is no longer performing as well as it did in the past. This can result in poor energy efficiency, increased heating bills, damaged property and the risk of condensation between the windows.

Mist

It is perfectly normal to observe condensation on your windows. This means that your double glazing system is working well and is able to keep warm in your home. The condensation develops because the outside air is more warm than the glass and it reaches its dew point before the window does. This is among the many benefits of having good quality double glazing.

If the condensation is located on the inside of your window then this can be a sign of a problem with the ventilation in your home. This is because the excess moisture isn't going anywhere and ends up on your windows or in carpets, furniture, and in other areas within your home. This can be prevented by having it checked out by an expert and ensuring that there is plenty of fresh air in your home.

Another reason for mist to appear on double-glazed windows is because the seal between two panes of glass has broken. This can be caused by wear and tear, or due to the use of chemical cleaning products. If this happens, the best option is to repair the windows as soon as possible.

Repairing your windows professionally will ensure that they remain clear of fog, free of condensation and free of misting. It is also less expensive than replacing the windows, and you will save money on your energy bills.

A FENSA-registered window installer can provide you with a price to repair or replace your double-glazed windows. Upgrade your windows to energy-efficient A-rated ones when they are old.

It is best to keep copies of any agreements and warranties with your window installers. This will be very useful if any problems with the windows arise in the future, and you then contact your fitters to resolve the issues. This is a better option than ignoring the problem, which could lead to more problems for your home.

Close or open with difficulty

It's not just annoying when double-glazed windows are hard to open or close. They can cause more expensive energy bills due to the loss of heat and draughts. It could also be a security problem especially when the locks aren't functioning properly. It is essential to fix any issues with double glazed doors and windows as soon as you spot them.

If you're unable to open your window and have tried the simplest of fixes like using a screwdriver in order to break it open or tapping around the frame using a sharp object, then the problem may be more serious. It could be that the window has shifted within its frame and requires to be re-set or there is a gap between the glass panes and the frames. In either case, you should call in an experienced double glazing repair expert to make sure that the right repairs are done and to prevent any further problems.

It's not common to find upvc window repair window handles and lock mechanisms to become difficult to operate or get stuck, especially if they are old and worn. This is due to the accumulation of dirt or grease within the handle. It can be cured by cleaning it with a uPVC cleaner. If this doesn't help, you can try tapping the uPVC frame with a sharp object like an screwdriver, but be careful not to damage the handle or the window handle mechanism.

If this doesn't resolve the problem then the window may have to be replaced, since it is likely that the hinges aren't more in the proper position, or the locking mechanisms are damaged. In this instance, you must contact a specialist UPVC window repair expert.

David The Window Wizard specialises in all technical aspects of double glazed window and door repair including fixing a jammed or shut double glazing window. He has vast experience changing old window mechanisms to modern ones. He can often save you the cost of replacing the entire window. Contact us today for more information or a no-cost quote.

Warping

Double-glazed windows are typically a great option for saving energy at home. They consist of two separate panes that have a spacer, air or a dense gas between the panes, creating an airtight seal to keep cold air out and warm air in. However in time, the windows may become damaged or broken and require repair. Most of these repairs can be completed without replacing the entire window.

A common issue that double-glazed windows face is warping. The windows start to bow, bend, or twist, which can impact the strength of the window as well as its insulating capabilities. The best way to avoid this issue is to make sure that double-glazed windows are properly installed and maintained regularly.

If your double-glazed windows are starting to warp, it is crucial to get in touch with a specialist immediately to prevent the problem from getting worse. They will be able inspect your windows to determine the cause. They will then utilize special tools to correct the issue and make sure that your windows are sealed again.

Water vapour can cause this problem, as it may build up between windows over time. This can be caused various factors like humidity, weather conditions and temperature changes. To fix this problem the expert will drill out a small hole to release moisture. The specialist will use a cleaning agent on the glass to clean it, then apply sealant.

If your windows aren't able to be shut or opened, it could be due to a broken mechanism or hinges. It is recommended to lubricate these areas of the window prior to calling in a professional, as this may resolve the issue and decrease the need for replacements. If your windows are quite old or are not providing the insulation you'd like to see it is usually better to replace them.