20 Myths About Double Glazed Window Repair: Busted

Double Glazed Window Repair

It's worth looking over the warranty included with double-glazed windows in the majority of cases. It usually covers issues with window hardware, including hinges and locking mechanisms within the first 10 years.

Mist between the glass windows can be caused by a breach in the seal and needs to be repaired quickly to prevent mould or damp growing in your home.

Condensation Between the Windows

If you notice condensation appearing between your windows, this is an indication that the sealing in the gas insulating the windows has failed. This could be a major issue that needs to be dealt with as soon as you can, especially in winter when humidity is at its highest. This can also cause damage to the sills, sealant and mould.

Ideally, double-glazed windows should never be able to experience condensation between the panes. This problem is often caused by extreme humidity or a cold snap. This issue is usually resolved without the need to replace the entire window. A professional can drill small holes in the glass and then spray the inside of the window with a specially-formulated cleaning solution. The water is then taken out of the window, and an anti-fogger device can be fitted to prevent any further buildup of moisture in the future.

Condensation between windows can also occur due to air leakage or other causes outside the window. In this scenario it could take longer for the moisture inside the window to accumulate, because the air must be sufficiently warm to vaporise the water molecules. In these situations it is best to replace double-glazed windows instead of to try to repair the sealed units.

A double-glazed glass window comprised of two or more pieces of tempered insulated glass, which are joined by a metal framework. The gap between the two of the window is filled with a non-toxic gas for insulation like argon or Krypton and then sealed. The seal blocks the gases that are insulating from escape and also prevents moisture and air from entering the gap.

As windows age, seals deteriorate allowing moisture to leak between the glass panes. It is important to know the signs of leaks in the seals because it indicates that the double glazing isn't functioning as well as it did in the past. This can result in poor energy efficiency, higher heating bills, damage to the properties and the risk of condensation between the windows.

Mist

It is perfectly normal to see condensation appear on your windows. This means that your double glazing system is functioning well and is able to keep warm in your home. The condensation develops because the outside air is more warm than the glass and reaches its dew point before the window. This is one of the major benefits of having good quality double glazing.

If the condensation is located on the side of your window, this could be an indication of a problem with the ventilation in your home. The excess moisture can't go anywhere else and will end up on the window, carpets furniture, and other areas of your home. This can be prevented by having it examined by an expert and ensuring that there is sufficient fresh air in the house.

Another reason for mist to appear on double-glazed windows is that the seal between two panes of glass has broken. This can be due to wear and tear or chemical cleaning products being used. If this occurs the best solution is to get the windows repaired as soon as you can.

Professionally repairing your windows will ensure they remain fog-free free of condensation, and free of misting. It's also cheaper than replacing your windows and you will save money on your energy bills.

A FENSA certified window installer can provide you with a quote for repair or replacement of your double-glazed windows. Upgrade your windows to energy efficient ones that are A-rated in the event that they are extremely old.

It is recommended to keep copies of any agreements and warranties with your window installers. This can be extremely helpful in the event that any issues with your windows occur in the future, and you are able to then contact your window fitters to resolve the issues. This is a better option to ignore the issue, which could lead to additional problems in your home.

Difficulty to Open or Close

It's not just a nuisance when double-glazed windows are hard to open or close. They could also result in more expensive energy bills due to heat loss and draughts. It can also be a security problem especially if the locks aren't working correctly. It is important to repair double-glazed windows and doors in the earliest time possible.

If you can't open your window and have tried the simplest of fixes such as using a screwdriver to pry it open or tapping around the frame with a hard object, the issue could be more serious. It could be that the window is sagging within its frame and requires to be reset or it could be that there is an opening between the glass panes and frames. In either case, you must consult a double-glazing repair specialist to ensure the repairs are done correctly and to avoid any further issues.

It's not uncommon for UPVC window handle and lock mechanisms to become difficult to operate or get stuck particularly if they're old and worn. It usually happens due to the accumulation of dirt or grease in the handle. This can be easily resolved by cleaning it with a uPVC cleanser. If this doesn't work, you can try tapping the uPVC using a screwdriver. Be careful not to damage either the handle or window handle mechanism.

If this doesn't resolve the problem then the window may have to be replaced as it is likely that the hinges are no more in the proper position, or the locking mechanisms are damaged. In this case you should seek out a professional UPVC window repair expert.

David The Window Wizard is a specialist in double-glazed door and window repairs, including repairing upvc windows a double-glazed window that has jammed or been locked shut. He has lots of experience converting old window mechanisms to modern. This could save you money by replacing the entire window. Call or email us now for more information or a no-cost quote.

Warping

Double-glazed windows can be an excellent way to save energy in your home. They consist of two separate panes that have a spacer or dense gas in between them. This creates a seal that keeps cold air out and warm within. However in time, windows can be damaged or broken and require repair. The majority of these repairs to upvc windows can be completed without replacing the entire window.

A common issue that double glazed windows experience is warping. This occurs when windows begin to bow or twist or bow. This can affect the structural integrity and insulating abilities of the window. The best way to avoid this issue is to ensure that your double-glazed windows are installed correctly and maintained regularly.

Contact a professional immediately if you notice that your double-glazed windows are sagging. This will help to stop the problem from becoming worse. They will be able inspect your windows to pinpoint the reason. They will make use of special tools to fix your issue and make sure that your windows are sealed properly.

Water vapour can cause this issue, since it can accumulate between the windows over time. It can be caused by many factors, including the weather, humidity levels and temperature changes. To resolve this issue the expert will drill a small hole through the glass to let out the moisture. The specialist will apply a cleaning agent on the glass to clean it, then apply a sealant.

If your windows can't be closed or opened, it could be due to a damaged mechanism or hinges. It is advisable to lubricate these parts of the window prior to calling a professional as this can often solve the issue and decrease the necessity for replacements. If your windows are quite old or do not provide the level of insulation that you'd like to see, it is often better to replace them.