Who s The Top Expert In The World On Replacement Window Handle

Choosing uPVC Replacement Window Handles

Most customers agree that these upvc replacement window handles are simple to install and feel like good quality. It's crucial to understand that the handle you choose for your window has to be suitable.

The step height is the most important factor. It is the distance between the handle and the frame, or base. Other considerations include locking mechanisms and designs.

Replacement parts

You can purchase a range of replacement upvc handles. They come in a variety of styles and colors so there's sure to be something that fits your windows. It's easy to impulse buy especially when the handle breaks so it's a good idea to take your time and check the details prior to committing to buying a new one. The first step is to be aware of the type of upvc handles you own and what the differences are between them. The table below outlines the most common handles to help you identify the one that will fit your upvc windows.

The majority of double-glazed windows today come with handles that are epag. They are typically attached to the frame by two screws that are screwed in from both above and below.

They come with a spindle bar on the back, which can come in a variety of sizes and this will determine the way they operate (either left or right handed). This is the reason it's crucial to measure the current handle in order to make sure you're getting the right replacement.

Usually fixed with two bolts, similar to the Espag handle, but they are positioned low from the frame, which means that the handle will not poke through your blinds. This is a great choice if you want the handle to blend with your blinds, and you have upvc windows.

Cockspur handles resemble Espag handles, however they have a nose that closes over a wedge that sits on the frame of the window. This type handle is found on older wooden and upvc windows.

Tilt and turn handles are often found on casement windows. They can be operated either by turning the handle or pushing at the top of the window. The window is opened from the inside, allowing you to clean outside without having to climb out onto a ladder or step over the garden fence. They're ideal for those who have mobility issues, and can enhance security and access to the home.

Hints and tips

Many people will have to replace their uPVC window handles at some point. If this happens, it's a good idea to know a few hints and tricks that will help the job go as smoothly as possible.

Find out what kind of handle is in your home. Based on the kind of handle and the locking mechanism, it could be necessary for you to replace the lock and handle. If the roller cams and shoot bolts (espags) are jammed, or seizing up, you'll need to replace them as well as the handle.

Thankfully, the majority uPVC handles follow industry standards and are alike. This allows for a relatively easy process. First, take off the screws on the handles. These are usually pozidrive screws. Once the screws are removed then you'll be able to dismantle the handle.

When you have the handle split, it's an ideal idea to take a note of how much of the spindle protrudes from the base of the handle. This will help you to measure the length of the spindle to determine an alternative handle. Simply measure the length the peg is sticking from the bottom of the handle.

This is particularly crucial for inline uPVC window handles because they are always straight and open either left or right, and will not operate in the middle. It is a good idea if you're not certain of the type of handle you have in your home, to borrow a handle and see how it functions.

Another excellent method to figure out what the hand of the uPVC window handle is to look at the way the handle moves when it is operating. Handed handles will turn either clockwise or anti-clockwise. If you're not sure, ask someone to open the window with the handle and see how it functions.

Find the spindle's measurement.

The selection of the right replacement handle for your windows can be a challenge as not all handles are identical in size. The spindle is the part that is the mechanism that locks the window and it is crucial that when fitting the new handle it is measured to the length of the spindle accurately to ensure that it fits. There are several different types of uPVC window handles that operate in different ways, so it is essential that you know which kind of handle you have as well as the type of locking system that you are using.

The spindle of the espag handle extends out from the handle's rear and is connected to the lock gearbox within the window frame. When you turn the handle this turns the lock inside the gearbox and opens the window. They are used on uPVC windows with casement. They can be locked with keys for extra security.

Cockspur handles are equipped with a "nose" which closes over an elongated striker block that is placed on the frame. They are usually found on older double-glazed uPVC windows. They are also quite simple to use and can be locked using keys. These handles can be somewhat more difficult to locate replacements for since they aren't as well-known as the handles that have a swivel.

If you have a tilt and turn uPVC then you'll require a new handle that has an alternative locking system. The handle can tilt the window, and allow it to rotate back and forth to fully open it. You must make sure that the handle you choose has a spindle length at least 55mm, or it won't be able to penetrate the frame of the window.

The same procedure can be used to remove and replace the uPVC handle. However, you will need to take care when unscrewing it. It may be necessary to open the window more than normal to access both screws that secure it to the frame. Once you have fitted your new uPVC handle and checked that it is in the right position, you are able to tighten the screws, and test the lock to make sure it is working properly.

Install the new handle

Once you have the correct handle replacement, it's going to be easy to screw it into the correct position. This will require a screwdriver, but might be easier using an electric one. When screwing in place it is important not to over tighten the screws, as this could cause the handle to crack or warp.

Inserting the spindle is the second crucial step to install the new handle. The spindle is the component that runs through the handle and operates the locking mechanism inside the window. It is crucial that it is installed correctly since it will ensure that the window can be opened and closed securely.

There are several different types of uPVC window handles. There are various kinds of uPVC window handles.

Espagnolette Handles - These are handles that are inline and can be used to tilt and turn windows to open the window.

Cranked Espagnolette Handles - these are similar to the inline handle however they have a curved design that can be useful for windows that are difficult to reach.

Tilt and turn handles - These are used to operate the opening mechanisms and closing mechanisms when tilting and turn. They also move windows.

The majority of uPVC window frames come with these. They are commonly referred to as 'Bay Windows' in the UK.

If your uPVC window handle is damaged, it can be a major hassle. There isn't any need to replace the entire uPVC windows because of a damaged handle. There are a few basic steps you can follow to fix or replace a damaged uPVC handle.

By identifying the kind of window you have, calculating the length of the spindle, and then purchasing the replacement window locks handle, you can repair your broken window handle. It is important to be patient and prioritize security when working with windows and tools however, this is a simple task. It could mean the difference between having a safe and secure home or having a window that can be easily opened. If you have any questions or want to talk to a professional about replacing the handle on your window, call Bridgewater Glass. We have a team that is skilled and knowledgeable to assist you with any issue.