This Is The New Big Thing In Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and may even be fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good condition.

For single pane windows it can be relatively simple to replace them, and the replacement will usually fit inside the old frame very easily. However, if windows with double panes are secured by internal beading, it'll be more difficult to take out the old panes and put in new ones. In this case you'll need find some plastic spacers that help the new pane to fit properly into the window frame.

If you are going attempt to remove the window panes by yourself it is important to wear the proper safety gear such as gloves that are thick and eye protection. You should also lay down a dropcloth prior to you begin working on the window repairs panes, so that any shards fall onto the fabric and not on the floor, where they could be trampled.

After the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional can come out and fix the window. It also acts as a barrier to prevent any intruders from making their way into your home. If the distance between the door and the window is significant, you may need to consider an alarm system that has an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they may be afflicted by a variety of issues, including sliding. A sagging window in uPVC can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from worsening.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll have to open the window to access the frame. After that, using the screwdriver, you'll be able to take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and verify the fitting. If you're satisfied with the fit of the window repair, tighten the screws to secure them in place.

If you cannot reposition the hinges, you could need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to loosen. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows are waterproof and secure from draughts.

uPVC handles may also loosen. Often, this is caused by screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. The first step is to close your window and do a test fit. The corners of the sash must be aligned with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

It is crucial to take action if you get up each morning to find a smoky wall and floors that are wet. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant around the frame has been damaged or is missing.

It is a fairly easy fix and should be undertaken by any competent DIYer. Based on the severity of the problem the old caulking may require removal before a fresh layer is applied. It is important to keep in mind that when it is about uPVC window repairs you should avoid the temptation to "over-caulk and then make the area more difficult to clean and could reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious cases you may need to think about replacing the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to keep in mind that if the leak is coming from between the glass of your double-glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sagging. This can be easily corrected by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open in a breeze It could be the hinges that are at fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that are hinged and like any mechanical part they will wear out over time. It is very easy to change the hinges on a window however it is simpler if you have someone to help you hold the frame.

Verify that the uPVC hinges open and close in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The issue can be caused by opening the window improperly or by a poor installation at the factory. It is usually possible to fix the issue by sending us a photograph through our website and we will be more than happy to give you advice.

It is also important to grease the hinges regularly. Applying a light engineering lubricant to the hinges is a great method of doing this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It also decreases the possibility of a window sticking and help prevent corrosion. Ideally, you should perform this every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. First, the hinges due to wear and tear could become misaligned. This can cause gaps to develop where the sash joins the frame. If they're beyond repair, it may be necessary to get them re-aligned. The second is the interlock, which is located on the hinge side of the window, may also be misaligned, and again it is possible to just give them a thorough clean, however in some cases it might be necessary to have them replaced.

The second most frequent reason for draughts is window seals. These are prone to wear or damaged over time, and will allow air to escape through these gaps. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Another alternative is to replace the window with low-emissivity glass. which will help regulate indoor temperatures, and also lessen draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be put on top of your window sill. They will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repair, your upvc windows will continue to provide a great level of security and insulation for your home. It is crucial to keep in mind that all windows eventually get worn out and it is more cost-effective to replace them instead of fixing them. If you encounter any issues with your window made of upvc, it's best to consult an expert immediately.