The 9 Things Your Parents Teach You About Repair Patio Door Lock
how to repair patio door lock to Repair a Bad Patio Door Lock
A safe patio door is an essential part of home security. It can be difficult when yours is difficult to lock.
In many instances, a lock that is difficult to open is caused by the wrong alignment or just wear and tear. Lubricating the lock, or adjusting its position could help restore its function. If these solutions aren't working, you can replace the mortise lock and handle.
Clean and Lubricate
Over time, dust, dirt and grime can make it difficult to open or close the door lock. A regular cleaning and lubrication routine can stop your security device from becoming stiff or stuck, thereby saving you money on Repair Patio Door bills and allowing your door to reach its full lifespan.
In the beginning, you'll have to clean the lock's cylinder. To do this, you'll need a spray can of penetrating oil, like WD-40. Spray a small amount of oil into the keyhole, and then rotate the key to distribute it. Avoid using household oils or other solvents that can damage your locks, and make sure you spray some on the key itself as well.
After your lock cylinder is clean it's time to lubricate. You can use a dry lubricant such as graphite powder or sprays of silicone. Graphite is a lubricant that lasts for a long time that doesn't attract dust, unlike liquid lubricants. It's an excellent choice for locking lubrication. Silicone sprays are water-resistant and can withstand both humid and freezing temperatures, but may require multiple coats to be effective.
You can also apply de-icer spray, which is specifically made for cold weather. It will melt frost and ice off the mechanism of your lock. This will help you unlock your lock, and then lock it more easily.
How often you should lubricate your locks will depend on the environment. The location of your door can affect its performance. A location that is near the ocean can expose it to salty air, which can cause corrosion. The general rule of thumb is to grease your locks twice per year, or more frequently if you live in a region that has extreme weather conditions. Lubricating your patio door locks will save the cost of repairs and ensure that it will continue to function in a good way for a long time.
Reposition the Lock Cylinder
If your patio door lock doesn't work properly, one or more of its components could be damaged or misaligned. Regular inspection and prompt repair of a damaged patio door lock can avoid additional damage and ensure that your doors are secure. You can fix a patio door that is locked or locked by tightening loose screws, altering the lock mechanism or replacing the lock cylinder.
Begin by inspecting the exterior and interior of the lock for indications of damage or misalignment. The patio glass door repair near me door locks can expand or contract in response to the weather, and they might even shift with time. This slight movement can cause the locking mechanism to not align properly and can cause issues when opening or closing the door.
Then, check the lock cylinder for obstructions within the keyway hole. If the lock is corroded or blocked, the cylinder may be difficult to open and may cause damage to the latch springs, cam or lock pins. If the cylinder isn't fitting easily, you can remove any obstructions with a pair of tweezers and a picklock. If the issue continues then you'll need to take the cylinder out and disassemble it to locate the cause of the obstruction.
If the lock cylinder is not been screwed onto the body of the lock it can be removed by unscrewing the flat screw on the faceplate of cylinder. This screw will let you rotate the cylinder, and may even help restore the alignment.
Look for an elongated tab that moves along with the key. It's usually near the end. This little clip, also known as a "release tab" is what keeps the cylinder from sliding all the way into the body of the lock. The tab can be removed using a standard key to allow the cylinder to be removed, then returned.
If the cylinder of your lock has become stuck, you can restore alignment by rotating the cylinder until the latch bolt is engaged with the strike plate. The knob or handle can then be pulled and withdrawn. Once you've restored the proper alignment, put back together the lock and test it for performance. If your patio door lock isn't functioning properly It is likely that an additional component such as the latch or latch spring needs to be replaced.
Lock the Screws
Patio door locks are susceptible to damage from regular use, extreme temperatures dust, dirt and. These delicate components can wear out if not properly maintained, leading to your door to stop locking properly. Thankfully, most lock problems can be easily fixed with just a few simple maintenance steps.
The first thing you have to do is clean the lock mechanism. Make use of a damp cloth to clean any dirt or dust that may be present. Then dry the parts thoroughly. After cleaning some silicone-based lubricant can keep the moving parts functioning smoothly and efficiently. Avoid lubricants containing oil bases, however, as these can draw dust and dirt which could cause issues.
Next, if your patio door has a foot lock that is secure ensure that the lock is aligned with the strike plate. Most of the time, this will require you to adjust the screws that secure your foot lock to the frame of the patio door. To adjust the footlock simply loosen the screw using a Robertson screwdriver, and then gently push it up or down. Once the adjustment has been completed then tighten the screw.
When it comes time to repair the handle of a patio door the most frequent issue is misalignment of the strike plate and the latch. This could be caused by wear and tear, or the latch could be set lower or higher than it should be.
Begin by removing the old handle, and then locate the bolts or screws that hold it in place. Make sure to keep track of these since you will need them later when installing the new handle. Then, take off the old spindle and place the new one in place on the inside of the door. Make sure it is aligned properly with the holes in both the exterior and interior handle. Once the new spindle is in place put back the handles on the exterior and interior to ensure that they are properly aligned with the bolts or screws that secure them.
Close and lock the patio door once you have made any necessary adjustments. If everything is in proper alignment, the door should open and close without additional force. If you're still having problems, you may need to reposition your strike plate or latch, or replace the lock cylinder.
Replace the latch
If your patio door locks not working, it may be time to replace the lock. Most homeowners can change locks themselves. Start by sliding the patio door all the way open and then removing the current lock from the interior side of the door. Examine the lock you have to determine the type of lock you'll need.
Before you install the new latch, loosen the screws securing the strike plate (the part of the lock that's set on the outside of the door frame) and then adjust it horizontally or vertically to align it with the hole in the jamb of the door. After you've adjusted the latch plate, tighten the screws and fix it with screws.
After all the components are repositioned or modified, assemble and secure the patio door in accordance with the instructions given by the manufacturer. When you're done, check the latch to ensure that it is in place and fits the latch's hasp when your door is closed. If it does, your patio door lock is now functioning just as it should and is will provide you with the security and privacy you've come expect from your doors.
wood patio door repair doors, like other areas of your home must be aligned correctly to function efficiently. Over time, temperatures or cold, dirt and debris can cause the frames and hinges to shift. If these parts aren't aligned it's like trying to fit keys into the wrong hole for a key and it doesn't work. If you follow these steps, you can fix an issue that seemed unfixable. You should pat yourself on the back for tackling the task and reclaiming the patio door's closed position! We bet that you'll have no issues opening or closing your patio door again. Best of luck! We're here for you if there are any questions or concerns.