The 10 Scariest Things About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. They do not decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, which can make it very dangerous and potentially fatal. You should take the time to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace, and they generally fit into old frames very easily. However when you have double glazed window repairs pane windows that are secured by internal beading it will be more difficult to get rid of the existing panes and install new ones. In this situation, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth before you start working on the glass, so that any shards will fall onto the fabric instead of landing on the floor where they could be trodden under and cause further damage.

Once the glass has been removed from the window, it's best to seal the gap with packaging tape or duct tape to stop water and drafts from getting into the property until a professional can come out and repair the window. This also serves as a barrier to prevent any criminals from getting into your home. If the gap between the door and the window is substantial, you may want to use an alarm system that includes windows. This will give you the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. However, over time they may be afflicted by a variety of issues like sagging. A sagging uPVC windows can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from becoming worse.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll need open the window to get to the frame. Then, remove both the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and verify the fitting. If you are happy with the size of the window, you can tighten screws to hold them in place.

If you can't reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to lose tightness. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and secure from draughts.

uPVC handles can also become loose. The majority of the time it is due to screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need to shut the window and then perform a test fitting. The joints at the corners of the sash must align with the joint on the casing. If it doesn't, you can use the screwdriver to loosen up the handle. Then, turn the mechanism to position.

3. Water Leaks

It is crucial to act if you awake each day to find mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on the severity of the problem the caulking that was used up might need to be removed before a new layer can be put on. When it is time to uPVC repair, you must avoid over-caulking. This can make your window harder to clean and Pvc reduce its energy efficiency.

Make sure that the drainage holes have no debris in them and ensure that the sill pan has been angled correctly to drain away from the window. In more extreme cases, you may need to replace the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the problem is related to the seal, not the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it opens with a breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Almost every household in the UK will have top-hung or side hung upvc window repairs near me windows that have hinges and, just like any mechanical component they are susceptible to wear and tear over time. It's easy to change the hinges on a window however it is simpler if you have someone to help you to hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a certain way or by improper installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are more than happy to offer advice.

It is also important to lubricate the hinges on a regular basis. Applying a light engineering lubricant on the hinges is an ideal method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It can also lower the possibility of a window getting stuck and stop corrosion. The ideal time to do this once a year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. Firstly the hinges, again because of wear and tear, may become displaced, which causes gaps to develop where the sash joins the frame. If they're beyond repair, it might be required to realign them. In addition, the interlock could be unbalanced. It is located on the hinge side and could require to be cleaned. In some cases it might be necessary to replace these.

The next most common reason for draughts are the window seals, these are susceptible to being worn out or damaged over time and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping can help keep draughts at bay. Another alternative is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures, and also reduce the risk of draughts.

Another, and most effective ways to reduce the draughts in your home is to use a draught excluder, these are typically made of fabric filled with some sort of filler and can be placed on the top of your windowsill. These will help to block out cold air and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security in your home by performing regular maintenance and repairs. It is crucial to recognise that all windows have a lifespan and there may come a point where it is more cost-effective to replace them rather than repair them. So, if you're having issues with your upvc windows, it is always best to seek professional assistance immediately.