How To Outsmart Your Boss With Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't rust or rot.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will save you from unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, which can make it very dangerous and potentially fatal. You should take the time to ensure that your windows are in good condition.

For single pane windows, it is fairly easy to replace them, and the replacement is usually able to fit into the old frame very easily. If you have double-paned windows which are joined by internal beading, it is more difficult to remove and replace the old panes. In this situation you'll need source some plastic spacers to help the new pane to fit correctly into the window frame.

If you are going to attempt to remove the window panes yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric and not on the floor which could cause them to be trampled.

Once the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent water and drafts from getting into the property until a professional is able to come out and repair the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the gap is particularly large, you might think about the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. However, over time they may be afflicted by a variety of issues, including sliding. A sagging window can cause problems with light, draughts or even security. It's crucial to act as soon as you realize that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window which is sliding. First, you'll need to unblock the windows to get at the frame. Then, you can remove the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after you've repositioned your hinges. If you're satisfied with the fit of the window, tighten the screws to secure them in place.

If you are unable to reposition the hinges you may require replacing the seal. As time passes, rubber seals lose their elasticity and become dry which causes them to loosen. It is crucial to replace your seal as quickly as you can in order to keep your upvc window repairs near me window waterproof and draughtproof.

uPVC handles can also loosen up. This is usually due to screws that have loosened over time, but it could also be due to the mechanism of the handle wearing out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need to close the window and perform an experiment fit. The corner joints of the sash should align with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature in your home. Most often, upvc window repair near me window leaks are caused by damaged or missing sealant.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the issue is, the old caulking may need to be removed. It is important to remember that when it comes to upvc window repairs (check), you should not be tempted to 'over-caulk in order to make the area more difficult to clean and decrease the efficiency of your energy usage.

It is important to check that any drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more severe instances, you may need to replace the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to keep in mind that if the leakage is coming from between the glass of your double-glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sagging. It is also possible to be corrected by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open, or if it opens with an ease. These are easily repaired by any DIYer who is skilled and can be done within a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and like any mechanical part they will wear out over time. It is essentially a simple process, but it's simpler with someone else to assist in holding the frame in place.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. This can be done by looking for the arrow on each hinge. This indicates the direction in which the window should open.

The problem can be caused either by opening the window incorrectly or by a poor installation at the factory. This can often be resolved by sending us a picture via our website and we will be happy to give you suggestions.

Regularly lubricating the hinges is essential. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to open and close more easily. It also decreases the possibility of a window sticking and help prevent corrosion. Ideally, you should perform this every year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. Firstly the hinges, again because of wear and tear, may become displaced, which causes an opening to appear where the sash joins the frame. If they're beyond repair, it may be necessary to get them re-aligned. The second is the interlock, which is located on the hinge of the window, may also become misaligned, again it may be possible to just give them a thorough clean, however in some instances it could be necessary to have them replaced.

The next most common reason for draughts is window seals, these are susceptible to being worn out or damaged over time and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures, and also lessen draughts.

The final method to cut down on draughts effectively is by using a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be placed over your window sill. They can keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs your windows made of upvc will provide excellent insulation and security for your home. It is crucial to realize that all windows have a lifespan and there may come an point at which it is more efficient to replace them than fix them. If you are experiencing issues with your Upvc windows, it is best to seek professional assistance as soon as possible.