Five Things You Didn t Know About Replacement Window Handle

Choosing uPVC Replacement Window Handles

Most customers agree that the Upvc replacement handles are simple to install and feel great. However, it's important to know that the kind of handle you select should be appropriate for your window.

The step height is the most important factor. This is the distance between the handle and the frame, or base. Other factors to consider are lockable mechanisms and designs.

Replacement parts

There are a wide range cost of windows replacement replacement upvc window handles available to buy. They come in many different colours and styles so there's bound to be something that will fit your existing windows. It's easy to make impulsive purchases especially if the handle fails, therefore it's a good idea to look over certain things prior to committing to purchasing a new one. The first thing to think about is what type of upvc handle you have now and what the difference between kinds is. The table below lists the most popular handles so that you can choose the one that will match your window.

The majority of double-glazed windows have handles that are epag. They are usually fitted to the frame by two screws that are screwed into the frame from both sides.

The spindle bar at the back could be of different sizes, and will determine if they are left-handed or right-handed. This is why it's important to measure the current handle in order to make sure you're ordering the correct replacement.

The arm is secured to the frame by two bolts, much like the Espag handle. The arm has a lower projection, to ensure that it doesn't scratch your blinds. This is a good option if you have blinds on your upvc windows and want to make sure the handle will blend with the blinds.

Cockspur handles are similar to Espag handles but they have a nose that is closed over a wedge, which is placed on the window frame. This type handle is found on a few older wooden and Upvc windows.

Tilt and turn handles are typically found on casement windows and can be operated by turning the handle or pushing on the top of the window. This lets you open the window from inside and clean it from outside without the need to climb a ladder or step across the garden fence. These are ideal for those with limited mobility and increase security and accessibility in the home.

Tips and suggestions and

Many people will need to replace their uPVC window handles at some point. It's important to have some tips and tricks to help you make the task easier.

Examine the type of handle that is in your home. Depending on what the handle is attached to and what locking mechanism it is using it might be necessary to change the entire handle and lock. If the roller cams and shoot bolts (espags) are jammed, or seizing up, you'll have to replace them along with the handle.

Fortunately, the majority of uPVC handles are very similar and follow industry standard size, which makes replacing them a fairly simple task. The first step is to remove the screw covers from the handles. These are usually using pozi-drive screws. Once these are removed, you are able to take the handle apart.

If you've got the handle split, it's a good idea to make a note of how much of the spindle is protruding from the base of the handle. This will allow you to measure the length of the spindle to determine the replacement handle. Simply take note of the length the peg is sticking out of the bottom of handle.

This is particularly important for inline uPVC window handles as they will always be straight and open left or right, and will not operate in the middle. It's a good idea if you're not certain of the type of handle you have at your home, to borrow a handle and see how it works.

Another great tip for working out what handed the uPVC window handle is is to look at how the handle turns when operating. Handed handles can be turned either clockwise or counter-clockwise. If you're unsure, you can always have someone else open the window with the handle, and figure out how it works in this way.

Take a measurement of the spindle

Choosing the correct replacement handle for your windows can be a bit difficult since not all handles are identical in size. It is essential to measure the spindle accurately when fitting a new handle. This will ensure that the handle is suitable. There are numerous kinds of uPVC handles that operate in different ways. It is important to identify the type you have, as well as the locking mechanism you have.

The spindle of the Espag handle is a part that extends from the rear of the handle and then into the lock gearbox inside the window frame. When you turn the handle, this turns the lock within the gearbox and opens the window. They are installed on uPVC windows with casement and can be locked with keys to provide additional security.

Cockspur handles are commonly found in older double-glazed uPVC window frames. They are characterized by a "nose", which closes over a wedge-shaped striker block. They are also relatively easy to install and can be locked with keys. It can be more difficult to replace these handles because they are less common than the espagnolette handles.

If you have an open tilt and turn uPVC window then you will need to get a special type of uPVC replacement handle with a different locking mechanism. It will be able to open the window by tilting it, but also turn it back and forth to open it fully. It is essential to make sure that the handle you pick has a spindle size of at least 55mm or it will not be able to get into the frame of the window.

The same method can be used to remove and replace the uPVC handle. However, you'll have to be careful when unscrewing it. It may be necessary to open the window a bit wider than normal to access both screws that secure it to the frame. After you have installed your new uPVC handle and ensured that it is in the proper position, then you can tighten the screw covers and test the lock to confirm that it functions correctly.

Fit the new handle

Once you have the correct handle replacement, it's going to simply be screwed into place. This will require a screwdriver and could be simpler with an electric one. When screwing in place it is important not to over tighten the screws because this could cause the handle to crack or warp.

The second step in installing the handle is to install the spindle. This is the component that runs through the handle and operates the locking mechanism within the window. It is crucial that the component is properly fitted to allow the window to be opened and shut securely.

There are a variety of different kinds of uPVC window handles. There are a variety of uPVC window handles.

Espagnolette Handles - These are inline handles that can be used to windows that tilt and turn to open the window.

Cranked Espagnolette Handles: These are like inline handles but have a curvaceous shape that can be useful for hard-to-reach windows.

Tilt and Turn Handles - These are used on tilt and turn windows for operating the opening and closing mechanisms.

They are the most popular and the majority of uPVC windows have these in place. In the UK they are often referred to as "Bay Windows".

It can be very frustrating if your uPVC handle breaks. But, there isn't a need to replace the entire uPVC windows because of a broken handle. There are several easy ways to repair and replace a damaged uPVC window handle.

You can fix your broken window handle quickly by identifying the type and determining the spindle. When working with windows or tools it is crucial to consider safety first. However it is a simple job. It can be the difference between a secure and safe home or a unsecured open window! If you have any questions or want to talk to a specialist about replacing your window handle, contact Bridgewater Glass Window Replacements. Our team is experienced and knowledgeable to help you with any issue.