Don t Buy Into These "Trends" About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

Cleaning and lubricating regularly upvc window repair near me windows and doors is essential. This will help prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, making it very dangerous and potentially fatal. You should take the time to ensure that your windows are in good working order.

For single pane windows, it can be relatively simple to replace them, and the new window will generally fit within the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this situation it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. You should also lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric, not onto the floor, where they could be trampled under.

Once the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional comes out and fix the window. It also acts as an obstacle to stop intruders from making their way into your home. If the gap is large, you might think about a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows with sash. However, over time they can suffer from a variety of problems including sagging. A window that isn't properly aligned can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from worsening.

Repositioning the hinges can help fix a window that is sagging. You'll first need to open the windows to get at the frame. After that, using an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close your window and test it for an appropriate fit. If you're satisfied with the fit, tighten the screws to ensure that they remain in position.

If you can't reposition the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and draught-proof.

uPVC handles may also become loose. Often, this is caused by screws that have become loose over time. However, it can be due to the fact that the handle mechanism has been worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. You'll first need to close the window and perform an experiment fitting. The corners of the sash must be aligned with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains it's crucial to take action. Windows that leak water do are not just a cause for degrading of the structure of your home but also hinder your efforts to regulate the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the problem the caulking that was used up may need to be removed before a fresh layer can be applied. It is important to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and can reduce your energy efficiency.

Verify that the drainage holes have no debris inside them and ensure that the sill pan is angled correctly to drain away from the window. In more serious cases you might have to consider replacing the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This is a fungus that thrives in damp conditions and can quickly spread across the home.

If the leakage is occurring between the double-glazed window, it is more likely that the problem is with the seal rather than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open with a breeze It could be hinges that are at the fault. They can be repaired by any DIYer who is skilled and can be done within a few minutes.

Like any mechanical component hinges will wear out over time. It's very simple to change the hinges on a window, but it's easier if someone helps you hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused by opening the window improperly or a faulty installation in the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be more than happy to give you suggestions.

It is also important to lubricate the hinges regularly. Applying an engineering lubricant that is light to the hinges is a good way to do this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It can also stop corrosion and reduce the risk of sticking. This must be done at a minimum every year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different things. The hinges may also become unbalanced due to wear, causing an opening between the frame and sash. If they are beyond repair, it may be necessary to have them realigned. Secondly the interlock, this is on the hinge side of the window, can be misaligned. Again, it is possible to just give them a thorough clean, however in some cases it might be necessary to have these replaced.

The seals may wear out or be damaged over time, allowing air to escape. Installing high-quality weatherstripping is a good way to keep draughts at bay. Another option is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures and again will reduce draughts.

One of the most effective ways to cut down on drafts is to use a draught excluder, these are usually fabric tubes that are filled with some type of filler. They can be positioned on top of your windowsill. These will keep your home warm by blocking out cold air.

Your upvc windows can remain a great source of insulation and security to your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually become worn out, and it could be more cost-effective to simply replace them instead of fixing them. So, if you're experiencing problems with your upvc windows, it's recommended to seek assistance from a professional immediately.