5 Must-Know Window Repairs Practices For 2023

UPVC Window Repairs

uPVC windows are energy efficient and can aid in reducing heating costs. However, as they get older, problems can arise which need repair. This could include damaged hinges, handles, or locks.

Wooden window repairs can be relatively straightforward for DIY enthusiasts to tackle themselves. It can also be cheaper than buying a new window.

Cracks

Cracks and fractures can be a major issue. If they are not repaired, they can lead to water ingress as well as less effective barriers against cold weather, and even the risk of structural damage. It is essential to locate a local repair or builder that specialises in repairing uPVC frames and has the experience, skills and equipment required to achieve the most effective results. This will ensure that the crack is fixed before it gets worse and you don't have to replace your window glass or unit.

There are numerous home remedies that can be used to repair small cracks in the glass. Masking tape and super glue are among the most common products that will hold cracked glass in place for a while. For deeper cracks, tape may need be extended on both sides.

Alternatively, two-part epoxy can be used to fix broken or cracked glass. The majority of hardware stores offer this product at around $10. Make sure your workspace is prepped before mixing the epoxy. Also, make sure you have the right tool for the job, for example, a soldering tool.

If your upper or lower sash isn't lifting easily, it's likely because the cords that connect the sash weights are damaged. This is an easy fix that is done using a ladder and a flathead screwdriver. Replacing a drip cap that has rot is a second repair that can be completed at home. Many home centers stock a drip caps that are not rot free and can be easily nailed or caulked to be fixed. Lastly, if you have a double- or triple-pane window, be certain to ensure that one of the panes isn't broken. This is because the gasses that fill the space between the panes are responsible for improving energy efficiency and should be retained and not released.

Water Leaks

If your uPVC window is leaking, this can cause damage to your home and cause costly repairs. Water leaks may also cause structural damage to your home as well as mold growth. It is important to fix any problems caused by leaking windows immediately to prevent damage.

A damaged sealant around window frames is a common cause of leaks. Silicone caulking will restore the seal to its original state and prevent leakage. Look for gaps and cracks around the window frame, as well as the brick or stone wall surrounding your windows.

A blocked drainage hole or an issue with flashing are also common causes of leaking windows. Make sure that the drainage holes haven't been blocked or blocked, especially after a heavy downpour. It's also a good idea to inspect the flashing that runs around the lower part of your window to make sure it's properly sealed.

Finally, it's essential to check that your drip cap isn't broken or rotten. A rotten or damaged drip cap can allow water to enter the window from above and cause damage to the structure of your home. Replacing the drip cap isn't a complicated job and typically a simple task of buying a new one and nailing it into the right spot.

A professional can also check your windows for watertightness. They can use a special tool to measure the water-tightness of your windows to make sure they are in line with industry standards. If your windows fail the test, they will need to be replaced. This is a costly repair but it's worth it for the comfort and security of your family.

Sagging

If your windows don't close properly, it could result in a myriad of problems, including condensation, drafts and a rise in your energy bills. It can also be a sign that the windows weren't properly installed or the sealant is no longer working. There are a few things you can try to solve the issue.

The first step is to set up an area that has plenty of light to repair your window in a timely manner. Start by laying down newspaper or a blanket to shield the flooring from any splinters and drips from the windows as you work.

You will also want to make use of a white cloth that has been immersed in a solution of water and detergent. This will ensure you don't leave any color stains on your windows. Mark the location of the hinge channel on your uPVC window when you are ready to start working. Then remove the channel from the frame and fill in the screw holes with epoxy (for uPVC windows) or wood filler (if frames are made from wood). Be sure to smooth the hole that you have filled before it sets.

Reinstall the hinge channel after the holes have been filled. Be sure to place it on the window jamb, and then drill the new screw holes about a quarter-inch away from the original locations.

Then, measure the length of the spindle protruding from the underside of the handle and order an alternative online or bring the old one in to an hardware store to get a matching. Then, remove the setscrew from the operator shaft. Flatten it to allow the set screw to be locked onto the shaft. Now your uPVC windows should be closing without a hitch.

Broken Hinges

You will have difficulty opening or closing your upvc window repair near me windows in the event that the hinges are damaged or aren't functioning correctly. This could be a security problem and also prevent your home from staying warm or cold. You can easily purchase a new hinge for your uPVC window repairs near me. However, it's important to make sure you have the right type of hinge for your windows.

This is because the hinges must be of the same width to fit in the frame of the window. The most popular hinge for uPVC windows is standard 18mm or UPVC 15mm window hinges. There are also specialised hinges for wooden frames. The proper hinge can help you avoid common problems with your windows.

Your window hinges could be stiff or loose for a variety of reasons. The hinges might not be tightened enough. To test this, take a screwdriver and locate the friction screw at the end of the hinge. Then loosen it. You can then adjust it by turning it in either direction.

Contact Preston Glass Fix if your UPVC window's hinges aren't functioning correctly. We can offer an immediate fix. Our technicians will examine the condition of your hinges, and give you suggestions on the best solution. We can replace your window hinges, adjust them or install new locking mechanisms to ensure that your UPVC windows are secure and safe for a long time to come.

Faulty locks

UPVC window locks and mechanism are an essential part of your home security, they make it extremely difficult to open the window without breaking in. It can be a hassle when a lock fails but you don't need to replace the entire window.

Often the problem can be a minor issue which could have been averted if you have had regular maintenance. We recommend that you have your uPVC window cleaned regularly as part of our annual maintenance package in order to decrease the chances of any issues.

Modern uPVC windows are equipped with espagnolette locks. They work by pushing the nose end of the handle on the block with a wedge, and then turning it to close the lock. They are effective at locking the window, however if they are not maintained correctly, over time they may start to fail. We recommend applying WD-40 to them a couple of times a year.

If you notice that your uPVC windows aren't opening or close as smoothly as they used to or if the lock is not working properly it is likely that there is a problem with the gearbox that locks the window frame. The process of removing this gearbox can be difficult since it requires the removal of seals around the frame as well as the removal of the handle (be cautious not to damage these).

A locksmith who specialises in UPVC repairs is able to diagnose this fault quickly and then be able to repair the gearbox that failed to lock with a precise replacement. This is a quick and easy repair that can save you hundreds of dollars by not having to purchase new windows.