20 Myths About Upvc Window Handle Replacement: Busted
UPVC Window Handle double glazed replacement windows
Replacing a damaged or broken window handle is a easy task and with the right tools it can be done quite quickly. It is important to know the type of handle and the spindle length before buying a replacement.
Older uPVC windows have handles with cockspurs, which have a spur that protrudes to secure a wedge-shaped cockspur striker plate. They can be left- or right-handed, and must be matched when replacing.
What kind of lock or handle do you have? I have?
There are many different types of window handles made from upvc and locks, each with their particular advantages and uses. The kind of handle you choose will determine how easy it is to open your windows and if the locking mechanism functions in the way you want it to. Over time and through regular use, window handles made of upvc may become damaged or worn out, making them less secure and efficient. In some instances they might even disappear completely. It is essential to fix the handles on your window made of upvc when you notice they are falling off. This will stop possible burglaries, and keep your house secure.
The good news is that replacing your window handles made of plastic is a simple task that is achievable by everyone. With a few basic tools and the proper knowledge it's a simple process that shouldn't take longer than a couple of minutes. It is important to know the type of lock or handle you have on your window cost replacement. This will help you choose the correct replacement.
Inline Espagnolette Handles
They are the most popular type of upvc handles and are typically located on the outside cost of a window replacement your window. They have a flat design and have a latch that connects to the locking mechanism of the window frame when turned. Inline upvc handles have spindles that run through the middle of the handle and then into the frame of the window to operate the latch.
Cockspur Handles
They are usually found on older uPVC windows and have a distinctive hook-shaped design. Cockspur handles are attached to the frame of the window by one screw, and are less secure than other varieties of window handles.
Handles that turn and tilt
In contrast to other handles made of upvc, tilt and turn handles can both be rotated to open the window, and tilted inwards to allow ventilation. They feature a 7mm spindle at the back and are available both in left and right-handed versions.
It is crucial to determine the size of the spindle when purchasing a new upvc handles. Not all are exactly the same size. Drop something in the middle of the hole to check the length. This is the maximum spindle size that will fit your windows.
What is the spindle?
uPVC window handles operate similar like doors, turning the handle to activate an internal latch within the frame. This opens the window so that it can be closed and opened. The handles can become damaged, especially if frequently used or exposed to harsh environments. This could mean that you have to replace your uPVC handles on windows since they might not be able to operate the window in a proper manner for a long time.
There are many types of uPVC handles, including Espag, Cockspur, and Spaded handles. These handles are designed to fit into the uPVC frames in different ways and each handle type has a particular spindle that is used to secure the mechanism to the window. This is why it is essential to identify the type of handle you have on your uPVC window so you can get the correct replacement glass for windows replacement it.
You can check what type of uPVC handle you have by taking a look at the base of your handle. There should be a "snap in cover over one screw that holds the handle's base in the correct position. After removing this you will be able to see the screw that holds the base of the handle in place. After both screws are removed you should be able to pull the handle away from the uPVC window.
Once you have removed the uPVC window handle, you have to carefully unscrew the old spindle from the locking mechanism. Note the length of the spindle. You'll need to purchase a new one that is the same length as the handle that was originally used and locking device.
The spindle wears down and cannot operate the locking mechanism. This could be due to corrosion, damage caused by constant use or an unreliable locking mechanism. If this happens, you'll need to replace both the window handle and locking mechanism in order to restore the full functionality of your uPVC Windows.
How do I remove my old handle?
Window handles can be damaged or broken over time. It is essential to fix them as quickly as possible to ensure your safety. It is easy to replace a damaged or worn handle. The job can be accomplished in under a minute without the need of special tools.
The first step to remove the handle that was previously used is to remove the screw that is located at the top of the base of the handle. After this screw is removed, the handle can then be pulled away from the base section. There will be a second screw that is located at the bottom of the handle's base, and it can be removed as well. After these two screws are removed, the handle will be removed from the base of the window replacement companies.
After removing the old handle, align the fixing holes of the new handle to the holes already present in the window frame. If there is a cap or sticker on the new handle, remove it if needed and put the handle back in place. It is important to check that the handle is working after it is put in place. Turn the handle and ensure that the lock mechanism is in place.
Espag handles come with a spindle that protrudes from the handle and slots into a multipoint locking mechanism in the window frame. Cadenza windows come with an edge with cut-outs which slot into the lock mechanism while Cockspur handles have an extended nose that hangs over either the frame's outer or the transom bar cross member within the window.
Once you have the new handle in place, you can insert the spindle into the lock inside the window and then tighten it. Replace the snap-in cover and screw cap (if applicable) once the handle has been firmly fixed. Now that the handle is in use, simply open and close the window a few times to make sure that it functions properly and securely.
How do I install the new handle?
It's not that difficult to change the handle on your windows made of uPVC. The procedure is easy. You only need a screwdriver, and a bit of perseverance. First, make sure the handle is not locked. Then remove any screws that are visible. You can also replace them using screw caps. After removing the handle, you'll need to take note of the length of the spindle that extends from the back. This is important because it will determine the kind of handle you will need to buy.
Espagnolette handles on uPVC are the most popular type of handle. The spindle runs through the handle to operate the locking mechanism in the frame of the window. Once the handle is turned it opens the latch on the window and allows it to open. When used regularly and time, espagnolette handles may become damaged.
Cadenza handles are a form of uPVC handle that is typically used in tilt and turn windows. They feature a protruding blade that works with a multiple-point locking mechanism within the window. They are generally more secure than handles made of espagnolette because they can only be opened from the inside. They can be replaced using the same method as espagnolette handles however you should make sure that the new handle has an angled blade, as opposed to one that is flat.
After you have picked the correct handle, you can align the new handle with existing screw holes prior to fixing it with screws. After that, you should put the screws back on and test that the new handle functions properly. You can do this by moving the handle back and forth from the locked position to the unlocked one a few time. It may be worth contacting an expert to determine how you can fix any issues. They are often able to advise you on the best approach to solve the issue in a speedy and effective way.