20 Double Glazed Windows Repairs Websites Taking The Internet By Storm

Double Glazed Windows Repairs

There are many reasons your double glazed windows might need repairs, from condensation between panes to draughts and dropped or sagged frames. The majority of these issues are fixable.

Try applying lubrication to the hinges, handles and mechanism of your window or door in case it is hard to open. This is a simple, cheap fix.

Broken Panes

If a window pane is damaged, it loses its insulation and could cause draft. If the muntins which divide the glass panes are also broken, water can get in between them and cause condensation, mould or mildew. This will make your home less energy efficient. A damaged window should be repaired by an expert to ensure that you get the correct seal and maximum energy efficiency.

First, you'll need to take the broken glass off. Begin by placing a cheap glass cutter from a hardware store under the broken pane. Before you begin, grease the cutter of this tool using an oil that is light. This will stop the glass from shattering too easily. The ball-shaped tip of the tool can be used to loosen the fragments. They should come off fairly quickly.

Scrape any old glazing compound out of the frame's recess after the glass has been removed. This will reveal the glazier's facets and metal clips that hold the pane in the frame. Replace them if there is any corrosion. If the window is wooden, the glazier's points can be reused if they're intact.

You'll then need to prepare the surface of the frame for reglazing. Apply a continuous strip compound to the recess with a caulking tool. Make use of a premium putty, such as a glazier’s compound in a cartridge. Allow it to dry before inserting the glass. If the frame has metal clippings, they should be reinstalled too. Then, you can put back the divider muntins.

Condensation

Condensation can cause problems for double-glazed windows, especially in winter. It's typically caused by excessive moisture in the house, with warm air meeting cold glass, which then condenses into water droplets and collects in the corners of your windows or across the frame. This can be avoided by opening your windows more often and improving ventilation by installing extractor fans, and using dehumidifiers to lower the moisture levels. If condensation continues to occur it is recommended to contact an expert who will be able to pinpoint the issue and fix or replace the windows if necessary.

It's also important to know that condensation on double-glazed windows can actually be an indication of a leaky seal. The vacuum seal applied at the factory may wear away over time and allow cool air to pass between the panes. This can cause fogging of the window, and eventually mold growth if not dealt with promptly enough.

You can use a hairdryer for a quick way to get rid of excess moisture. This is only a temporary solution and should only be used as a last alternative. If the condensation has been left for too long you could be looking at mold or dampness within your home, which should be dealt with by a professional.

As a long-term solution, you can get your double-glazed windows sealed by professionals. They'll take off the affected glass pane, clean the gap and pipe hot air into the gap to eliminate any moisture. In this process, they'll look for signs of damage, mould or mildew growth and apply a draught-proofing treatment to ensure your windows are fully operational and energy efficient again.

Draughts

As time goes by the rubber seals around the edges of your glass are likely to fall apart and cause a draught to form in the space between the two panes. It is simple to replace the gaskets that will form an airtight seal. This will keep warm air inside your home, and cooler air outside. You can reduce your energy bill.

Double glazing that is misted could be an indication of blow-blown seals. The unit is made up of two panes of glass that are separated by the spacer bar to create an insulating space. It is then filled with gas, such as argon for example, to make the window repairs near me airtight. If the seal has blown the water vapour will get into your space through the gap. This can cause condensation between the glass panes, which is not able to be removed.

This is a simple problem to solve and windows can be swiftly repaired by professionals using the right tools. The expert will employ a tool designed to push the new seals into place and it is usually faster than trying to do it manually. These tools feature an edge that can be used to push seals into corners.

In certain cases an expert might be able to "reseal your windows' by drilling a small opening into the window and then adding the desiccant material, or putty. This is more cost-effective than replacements and it will still offer a reliable draught-proofing solution for your double-glazed windows.

Faulty Hinges

Misted double glazing is a typical issue that many people face. This can be caused by broken or cracked glass frame, or even a broken seal. It is usually possible to fix this problem. This usually involves creating a seal between two glass panes. The new seal will prevent condensation, draughts and leaks.

Contact the company from whom you purchased your windows, and inform them of any issues immediately you discover them. Be sure to do this in writing and ask them to confirm that they have received your notification. Making sure that everything is in writing will make it easier to resolve any disputes arise, because it is easier to prove that you actually complained.

In some cases, a window repair specialist will cut the hole in your windows to draw out moisture and make an entirely new seal. However, this is generally only a temporary fix and won't stop the moisture from returning. It might also be possible to replace just the glass part, which will make it watertight.

Remember that you should only attempt DIY fixes if your skills and knowledge are adequate. Using super glue or another kind of DIY solution could cause more harm in the long in the long run. If you are unsure of what to do, it's always better to seek professional advice. You can find an expert local to you who can offer double glazing repairs by typing your postcode in the search box on Checkatrade. All of our traders are thoroughly vetted and checked which means you can rely on them to provide a high-quality service.

Broken Seals

Double-glazed windows are secured by window seals or insulation gas. A variety of factors can cause them to break, such as age, weather conditions and power washing, so it's crucial to be aware of what the symptoms are and how to repair them.

When a window seal fails humid air can get between the two panes of glass, creating fog. This is a frequent issue that can cause the window appear disfigured. When the seal fails it is when any argon or other inert gas is lost from the glass, diminishing its insulating properties.

A damaged window seal can be repaired by having it replaced with the new one by a professional glazier. This can be expensive and may not solve the fog issue. Some companies offer defogging services that involve putting a special vacuum pump in the window frame to remove the moisture and make the glass clean. This method isn't foolproof and does not replace inert gasses, so the fog could return.

If the IGU (insulated unit) is beyond repair, a glazier may replace it. This is the most cost-effective option and is a great choice if you are looking for a long term solution. It's best to select a company who offers warranties on replacement windows. This guarantees that any issues you may have are covered. You can be certain that your investment will provide the most effective results. You can also try to avoid the problem by selecting an item of high-quality and following the care instructions that are provided by the manufacturer. This will extend the life of the window and reduce the number of repairs.