17 Reasons Why You Shouldn t Not Ignore Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they do not rust or rot.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home, and could even be fatal. It is important to make sure that your windows are in good condition.

For single pane windows, it can be relatively simple to replace them, and the new window will generally fit within the frame that was previously installed easily. If windows with double panes are joined by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

If you are going attempt to remove the window repair panes by yourself it is crucial to wear the proper safety gear such as gloves that are thick and eye protection. It is also a good idea to lay down a drop cloth before you begin working on the glass so that any shards fall on the fabric instead of onto the floor where they could be trampled upon and cause further damage.

It's a good idea to seal the gap after the glass has been removed. This will prevent drafts and water from entering your property until a professional is able to repair the window. It also acts as a barrier that will prevent any intruders from gaining entry into your home. If the gap is large, you may think about a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. However, over time they may be afflicted by a variety of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from getting worse.

Repositioning the hinges can help fix a window that is sagging. To accomplish this, you'll need to open the window to get to the frame. With an screwdriver, remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and check for an appropriate fit. If you are happy with the fit of your window, tighten the screws to hold them in the right position.

If you are unable to reposition the hinges you may need to replace the seal. Rubber seals can dry out and lose their elasticity with time, leading them to loosen. If this happens, it's crucial to replace the seal as soon as possible to ensure your uPVC windows are watertight and secure from draughts.

UPVC handles can also become loose. Most often it is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to shut the window and then perform an initial fitting. The joints at the corners of the sash must align with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains, it's important to take action. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be done by any skilled DIYer. Based on the severity of the problem the caulking that was used up may require removal before a fresh layer is applied. It is important to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and reduce your energy efficiency.

Check that any drainage holes have no debris in them, and also ensure that the sill pan is angled correctly to drain away from the window. In more serious situations, you might need to consider replacing the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage occurs between the double-glazed window, it is more likely the issue is related to the seal, not the frame. Again this can easily be fixed by a upvc window repair window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open with ease It could be the hinges that are at fault. These are easily replaced by any competent DIYer and are usually done within a few minutes.

Like any mechanical part hinges will wear out over time. It's easy to replace a hinge on a window but it's much easier if someone helps you to hold the frame.

Verify that the uPVC hinges are open and closed in the correct direction. You can check this by looking for the arrow on each hinge. This shows which way the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window a certain way or by inadequate installation at the factory. Sending us a photo via our website will often solve the issue. We are happy to offer suggestions.

It is also crucial to lubricate the hinges on a regular basis. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to operate and close more easily. It can also reduce the risk of a window sticking and prevent corrosion. This should be done at least once a year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges may also become unbalanced due to wear, creating an opening between the frame and sash. If they're beyond repair, it may be necessary to have them realigned. Second, the interlock can be misaligned. This is located on the hinge's side, and could require to be cleaned. In some cases it is possible to replace these.

These seals can wear down or become damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping can help prevent draughts. Replace the windows made of upvc with low-emissivity glass. This will help control indoor temperatures, and reduce draughts.

The final method to cut down on drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be placed over your window sill. These will help to block out cold air and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security in your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually wear out and it is more cost-effective to simply replace them than to repair them. If you encounter any issues with your window made of upvc, it's best to consult a professional immediately.