"A Guide To Saab 9-3 Key Replacement In 2023

How to Replace the Replacement Key Battery For the saab replacement keys uk 9-3

Saab owners must follow a set of steps that are unique to add an additional ignition key. It requires dealer service with an electronic handheld computer called Tech-2. Then a new key as well as transponder must be purchased and programmed to the car.

It is an excellent idea to rotate your keys so that one doesn't wear out more quickly than the other. This will also help keep your keys in top condition.

Replacement Case

In contrast to the traditional Saab keys of old keys, the latest keys have electronic components which makes it hard to copy. This has made stealing car keys much more difficult than twenty years ago. However, it also has made the replacement of lost keys a much more expensive task.

Every owner of a Saab 9-3 needs to have at minimum two working keys. It is expensive to replace a lost key because it requires replacing the CIM module, and reprogramming the locking cylinders. Dealers charge between $100-$200 to do this.

There are options to avoid these costly costs. Some parts retailers will find the code from an old key (usually the same one that opens the doors and turns off the ignition) and cut a new key blade out of metal for a fraction of the dealer's cost. The key, however, must be identical to the original in order to function in your car.

You can also replace the case yourself by following these steps. You will need an flathead screwdriver and patience. Utilizing the screwdriver, slowly break the plastic and separate the emergency keys from the case. Once you have the case open, remove the electronics and put them back into your new case. Make sure to insert the correct badge and key back inside the case, too.

Replacement Battery

The Saab 9-3 replacement battery is a cheap part that can be easily and quickly replaced. This YouTube DIY video Cyclone Cyd shows how to replace the battery of the remote key fob in just four steps. This tutorial should work for any modern saab-type key fob, however the procedure might differ slightly.

The button is typically located just below the Saab logo on the back of the fob. This button is usually located on the back of your fob close to the Saab Logo. Use a flathead screwdriver to insert the screwdriver through the small hole in this button. This should be sufficient to let the fob case open in order to change the battery.

After the new battery CR1632 is in place it is possible to reassemble the remote key fob and then program it to your car. The whole process should take more than a half hour at the most. It is a very simple process that does not require any special equipment.

If you lose a key, the process will be more complicated however, it can be done. The dealer must find the VIN number of the car and then order a new key blade and TWICE module, both with the correct unique code. Then, they'll have to cut the new key and then program it using a brand new tool for programming called MDI.

Replacement Key Fob

The key fob is equipped with a battery that is used to lock and unlock your vehicle. The batteries are able to last for that is a long time, and they eventually go out of service. This is a common problem that happens with all cars and the good thing is that you can change the batteries on most key fobs without replacing the entire case. You can purchase replacement fobs from Amazon that include all the electronics already in place, so you'll just pop open the case and replace the old batteries. You will need to remove the emergency key before you replace the batteries. To do this, you need to insert the screwdriver of a small flat head into the slot that is in the middle of the. The screwdriver should be moved around the case, and it should split open, making it much easier to take it out.

When you're ready to replace the keys, ensure that you have spare keys, as this will reduce your total cost by a significant amount. If you have spare keys, you can ask the dealer to cut an entirely new key and then program it to the car, which is much cheaper than replacing the whole key fob.

It is possible to add a second key to your car in the event that you don't have one, but it requires an extensive amount of research and work. It can cost a few hundred dollars to get a second car key. The computer in the vehicle also has to be programmed. This can be done by a professional, but it is an expensive option for the majority of owners.

Replacement Ignition

In contrast to the earlier Saab automobiles, the current saab ignition key 9-3 models use an extremely sophisticated alarm system that is dependent on a coded keys. If you lose your sole key, it could be costly to purchase a new one because the car must be equipped with a specific computer and also be programmed to accept a new key. Dealers can charge hundreds of dollars to program an additional key in the event that they are unable to complete the task.

If you've lost the only working key the dealer will replace your car's computer (known as the CIM or saab keys replacement TWICE) to make a replacement, and will charge top dollar for it. Instead we can reprogram the EEPROM in your current car computer to allow it to be programmed for an additional key, which will save you more than 50% of the price you pay at a dealership.

If you have owned a 9-3 from SAAB for an extended period of time and you're aware of the ignition keys aren't very durable. They can become incredibly sticky, and the buttons are known to fall off of them from time to time and you should think about replacing your ignition key if it isn't working properly. Luckily, replacing the ignition key isn't as difficult as it sounds and can be done in a short time using the appropriate tools.