The 10 Most Scariest Things About Patio Screen Door Repair

Patio Screen Door Repair - How to Do it Yourself

A damaged or worn patio screen door isn't just ugly, but it also creates an easy entryway for pests like mosquitoes and Flies. While there are companies that will repair your patio screen door, it's quite simple to complete the work yourself.

Lay the screen flat on a work surface. Remove the handle from the screen by taking out the screws holding it in place.

Damaged Screens

It's not a surprise that your door or window screens will develop holes and tears due to weather pets, children, and even pets. These damaged sections are not only ugly, but also allow pests and flies into your home. Repairing these issues is fairly easy. While patch kits and screen repair tapes offer an easy fix for minor damage, these products don't work well on more serious issues. This step-bystep guide will show you how to repair and replace your screen doors and windows.

Examining the damage is the first step. Can you salvage the frame, or does it need to be replaced? It is important to take into consideration this since window and door screens frames are more susceptible to being damaged than the mesh. A bent frame could cause the screen to fall out of place and cause holes or weak spots.

After you've decided whether the frame can be salvaged, you can begin to build the mesh. For this task, you'll need a few essential tools. This process requires a spline roll for pressing the spline inside the frame, a utility knife and a pair of scissors. Using these tools ensures precision and durability in your repairs.

If you are dealing with a large hole, begin by removing as much of the old screen as is possible to make a clear opening. Then cut a patch of the new screen material to ensure it is at least a half inch bigger all around than the damaged area. Match the patch to your window's grid pattern if it has one. Trim the edges to eliminate any imperfections. Fold over the ends of spline to hide them.

Be aware of the climate of your locale when buying a replacement screen. Fiberglass mesh is a popular choice because of its flexibility and affordability and aluminum screens provide durability and snag-proofing. If your area is plagued by mosquitos and other pests you might prefer a specially-designed mesh designed for insect screens. Whatever type of screen material you select, make sure you stretch it tightly across the frame to prevent sagging or wrinkles.

Broken Rollers

A damaged roller on your patio screen door could be a frustrating issue. It can make sliding patio door repair service near me the door difficult and allow bugs to enter your home. The good news is that repair of your rollers isn't as expensive or complicated as replacing your door.

Start by inspecting your rollers to determine the issue. It may be that the wheel has sunk out, or maybe one end of the wheel has worn out by constant contact with the track. You can try to remove the wheels by inserting an screwdriver between the roller and the bracket. If you still can't remove the roller you can spray the shaft with WD-40 and try it again.

It's also a good idea to examine the tracks, top and bottom. If they're bent, you can straighten them by placing a block of wood against the bent portion and rapping it with a hammer. It's important to clean out the tracks, too, as they can trap dirt and sand.

Once you've identified the kind of roller that's damaged, you can buy a replacement. Bring your old rollers to the hardware store so you can be sure you're buying the correct type. If your door has more than one roller then you will need to buy enough to replace them all.

Before installing the new roller make use of a screwdriver to loosen the bolts or adjustment screws on the inside of the door frame near the door rollers. Once the screws have been loose, you can take the rollers from the bottom. It is best to have a person assist you in this process to help you free up your hands and focus on getting rid of the rollers.

After installing the new roller The door can be raised and the adjustment screws or bolts tightened. Check the alignment of both the track and rollers. If everything is in the correct position the patio door lock repair screen will be able to slide into place with ease.

Damaged Frame

There are several ways you can fix your screen door rubbing against its frame. Make sure the hinges are secure. Loose hinges could cause doors to bind, which means it will stop when you open or close the door. If they're loose then tighten the hinge screws. If this doesn't work it is possible to sand down the frame's top.

A rotting frame is another common issue with screens. It can be expensive to repair, since it typically requires replacing the entire frame. To avoid this, keep looking for signs of decay. Treat them as soon you spot them. You should look for wood that is darker than the rest. Be aware of any areas where the wood is beginning to warp or bow. If you find any of these issues, call an expert.

Repairing damaged frames with mesh patch kits that costs from $2-$7. The kit includes small pieces of mesh and glue that can be used to fix any holes in the screen. If the damage is minimal it is possible to try fixing it with a wood filler. To do this, apply the filler to the area that is damaged, wait for it to dry, then sand it to a smooth finish.

If you want a solution that is more permanent you can purchase frames lifts. A frame lift is a structure made of metal that bolts to your existing frame and lifts it up. This is a costly option, but can be the most effective option if your frame is badly damaged or has rotted.

You can build an easy leg for your screen door using wood scraps or an old display stand for a photo frame. Then, attach the brackets or wire to the back of the frame to hang it on the wall. You can also attach a piece of felt to the frame's bottom to shield your wall from scratches.

Broken Splines

A broken screen spline can be just as annoying to handle as a damaged frame or door. It might seem like a minor issue that can be ignored, but letting it go too long could allow pests like flies and mosquitoes to slip through. This can quickly escalate into an issue that is more serious, resulting in expensive repairs or a new screen door.

It is easy to repair a damaged spline, particularly when you have the proper tools. You will first need to take off the old screen door spline. This can be done by placing the frame flat on a work surface such as a table, or the ground. Utilize a screwdriver to pull up the free spline and pull it out. If the spline has gotten especially worn or brittle, it could break when you attempt to remove it from the groove.

As you remove the old spline, be sure you take off the caulking that was used to hold it in place. This will ensure that the new spline is properly fitted into the grooves.

Use a utility blade to cut the excess screen around the frame after you have removed the old spline. This will ensure you have a tight, clean fit on all sides of the frame when you put in the new spline.

Once you have a clean frame and have the new screen material cut to size, it's time to start installing the new spline. Begin with the shorter side of the frame. Place the spline on top and then begin rolling it with your splining tool to work it into the screen channel. Continue to roll the spline, bringing it in as you go. Repeat this process for each of the shorter sides of the frame. While you are working try to keep the screen taut using tape or spring clamps.

Repeat the process on the opposite side after you have completed the splining of all short sides. Then, you can finish by splining both the top and bottom edges of the frame.