Ten Subaru Car Keys That Really Change Your Life

How to Program a Subaru Key Fob

If your Subaru key fob does not have buttons that click, it is likely due to the battery being dead. Capitol Subaru's Service Center can replace the dead battery and teach you how to programme a new key when required.

Tom Wimmenhove, an electronic designer at Subaru has discovered an issue with the way Subaru key fobs process codes. It turns out they don't "roll" codes like other auto manufacturers.

Keyless Entry

Many Subaru Forester, Outback, Crosstrek, WRX, WRX STI, Impreza, and Legacy owners have access to keyless entry and push-button start as an added convenience. This technology is designed to provide you with peace of mind, whether you want to keep your keys safe or are concerned that someone could try to steal your vehicle.

The way it works is fairly simple. A sensor inside the vehicle detects a radio signal from your key fob when it's in the range of the sensor. If the signal is valid, the vehicle will lock or unlock as needed.

You can also limit the operation of the trunk and doors via the key fob changing the keyless entry setting on the multi-function display (models that come with "keyless entry using a push-button system"). Consult your SUBARU dealer for details.

Keyless entry is an excellent way to get in and out of your vehicle, even though you still have to use a physical or electronic key to open it. This technology lets you lock your Subaru before going for a run or mountain biking without having to worry that someone is able to find it and drive away in it. The key fob is also useful for people who do not want to carry around a number of keys when out hiking or camping, as it opens your trunk in a single click.

Remote Start

In the event of a traffic jam or at your desk or at your desk, remote start is a wonderful feature to have. With this feature you can begin your Subaru's engine from a distance, which will warm the cabin or cool it down when it's hot outside in the Fountain.

Remote start is possible using the built-in remote on your key fob or through the Starlink App. Both methods use the same radio frequencies to communicate, however the app gives you more options with an easy-to-use interface for mobile devices. The engine will shut down automatically after 5, 10, or 15 minutes, no matter what you do to control the vehicle. Once the vehicle is running it is possible to open the doors with your key fob and drive off.

You can also pre-heat the inside of your vehicle prior to when you arrive for an icy winter day. When you're all bundled up, ready to go skiing just press the fob and the interior will be warm. When you return to your car after a day of skiing, you'll be cozy and warm. Plus, you won't have to scrape the ice off of your windshield! Make sure you lock your car when you leave it for the day, so someone else doesn't accidentally drive it away when it's running. You'll want to be sure you know how to shut off remote start with your key fob or an app.

Car Locking

If you are leaving your car in a parking lot or going to a meeting by pressing the lock button on the key fob will ensure that everyone is safe. Subaru automobiles have a unique system which prevents the steering wheel from rotating until a key is in the ignition. It's an extra security feature designed to prevent theft by installing a hotwire in your vehicle. This feature is particularly useful when you're parking in an area that is crowded.

If you've noticed that the power locks on your Subaru Forester, Outback, Crosstrek, Impreza, or BRZ do not turn or aren't working correctly, there could be an issue with the battery in your key fob. In most cases, this is a simple fix at a Brooklyn Park Subaru service center.

Many Subaru vehicles can start when the key fob battery fails however, only if you know how to activate it. The key that is included in the majority of subaru keys replacements fobs is used to turn on the start system of the car.

To use this feature, press the lock button two times within 3 seconds, then press the unlock button to open your Subaru. Read the owner's manual or a Subaru dealer near you for more information about the type of keyfob you own, and the instructions that apply. Before you begin, open the circuit board for the transmitter within your Subaru's key fob and write down the first 8-digit number sequence (for example 12345). This is the code required to program your new or replacement key fob.

Security

Subaru has always been an industry leader in the field of safety. It's the reason their vehicles are equipped with a host of advanced driver assistance systems, along with innovative passive safety elements like an oblong-shaped frame for reinforcement. These features make the drivers of Subaru models in Memphis feel secure and safe on the road, no matter what they're doing.

PIN Code Access is one of the most useful safety features available in the world of Subaru. This feature allows you to unlock the trunk of your vehicle or lift-gate without the key fob. You can program a five-digit code that you can enter into your vehicle's trunk or lift-gate button.

Your vehicle will verify that you've entered the code by sounding a sequence of times. Once you've entered all five numbers into your Subaru then you'll be able to unlock the vehicle with the code you've programmed.

Contact us at Hiley Subaru Fort Worth to learn more about the most recent subaru car keys security and safety features. Or, visit our STARLINK online page. You can also download a STARLINK application to your phone or tablet to find out more details about your car and the features it comes with. You can even connect with your STARLINK concierge to get assistance in your vehicle for your next road trip or to arrange service at our dealership!