The 10 Most Terrifying Things About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they do not corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and may even be fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good repair.

Single-pane windows are fairly simple to replace and generally fit into frames that were previously in use very easily. However, if you have double-pane windows that are held in place by internal beading, it'll be more difficult to remove the old panes and put in new ones. In this case it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you are going to try to remove the glass panes yourself it is important to wear the appropriate safety equipment, including thick gloves and eye protection. It is also an excellent idea to lay down a drop cloth before you start working on the glass so that any shards will fall onto the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

It's a great idea to seal the gap after the glass is removed. This will keep drafts and water from entering your property until a professional comes out to fix the window. It also acts as a barrier that will prevent any intruders to gain access into your home. If the gap is large, you may be interested in a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

upvc window repair is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. In time, they could be affected by a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It is crucial to act immediately if you realize that your uPVC windows are sliding.

Repositioning the hinges could help fix a window that is sagging. To accomplish this, you'll have to open the window so that you can get to the frame. Then, using the screwdriver, you'll be able to take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close the window and check for fitting. If you're satisfied with the fit, tighten the screws to ensure they remain in the right place.

If you are unable to move the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to lose tightness. It is important to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also loosen. The majority of the time this is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to shut the window and then perform a test fitting. The joint at the corners of the sash must align with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into position.

3. Water Leaks

It is important to act if you wake up every morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and hinder your ability to control the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be done by any DIYer who is competent. Depending on the severity of the problem is, the old caulking may have to be removed. It is crucial to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and can reduce the efficiency of your energy.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more serious instances, you may need to replace the window.

Mold spots and rotten sills are another sign of water leakage. This mold thrives in damp environments and can quickly spread across the house.

If the leakage occurs between the double-glazed window, it is more likely that the issue is with the seal than the frame. It is also possible to be corrected by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open, or if it blows open with the breeze. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like all mechanical parts, hinges can be damaged over time. The process of replacing a hinge on a window is an easy procedure, but it is easier to do with someone else to help you hold the frame up.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused either due to opening the window in the wrong way or due to a poor installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are always happy to give assistance.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant on the hinges is a great way to do this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more smoothly. It also helps prevent corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few various factors. The hinges, also due to wear and tear could become misaligned. This can cause a gap to form between the sash and the frame. If they're beyond repair, it could be required to realign them. Secondly the interlock, this is located on the hinge of the window and can be misaligned. Again, it is possible to give them a clean but in some cases it might be necessary to have these replaced.

The next common reason for draughts are the window seals. These can become worn down or damaged over time, and allow air to escape through these gaps. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Another alternative is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will reduce draughts.

One of the most effective ways to reduce drafts is to use a draught excluder, these are usually fabric tubes that are filled with some sort of filler and can be put on the top of your windowsill. These will help to stop cold air from entering and keep your home warm and cozy!

With a bit of regular maintenance and repair windows made of upvc will continue to provide an excellent level of security and insulation for your home. However, it is important to recognize that all windows have a lifespan and there may come a point where it is more efficient to replace them than fix them. So, if you are having issues with your upvc windows, it is always best to seek professional assistance as soon as you can.