15 Reasons To Love Replacement Upvc Window Handles

Replacement Upvc window double glazing replacement Handles

The majority of replacement window replacements handles made of upvc include everything you require but if the original handle was fitted with screws or pins that held it in place, they must be removed. Then, you need to remove the snap-in cover at the base of the handle.

The next step is to determine what kind of window and lock that your new handle It is essential!

Espag

Espag handles are a system of multipoint locks that are designed to fit on casement windows such as uPVC or wooden double glazing. They come with a 7mm square spindle that is fitted into the gearbox of the uPVC window. When the handle is turned, it triggers with a series of locks that run around the perimeter of the window. Espag handles, also referred as shootbolts, offer more security than the single point lock that is found on older window frames.

They are available in a variety of different designs, including inline and cranked handle designs that can be used either left or right hand operation. You can also find various ergonomically designed handles that are created to enhance the feel of the handle and the way it looks on your windows.

You will need to measure the size of the spindle from the base of your uPVC handle if you wish to purchase the correct replacement. This measurement, known as the step height will help you select the ideal uPVC window handle for your home.

If you require to remove screws that hold the handle, use pliers or a screwdriver. After removing the pins or screws that hold the spindle together you can take it apart to disassemble the handle.

After you have removed the handle, you can open the locking mechanism within the frame of the windows and remove the cockspur block located next to the handle. This will allow the window to be opened. The new uPVC window handles you have ordered should now be able to fit onto the cockspur wedge block, and then into the spindle of the handle, allowing the window to open again. If you'd like to make sure that your uPVC handles are securely secured and secure, you should replace the cockspur block a brand new one.

Cockspur

Cockspur handles are generally found on older uPVC and aluminium windows. The handle is turned and then closes over the receiver, which is a wedge-shaped plastic catch (not to be confused with timber window latches that are also covered in this section). The handles are available in lockable and nonlockable models. They are available in a variety of different nose heights to fit the existing frame.

The handle locks by the thin spur (little triangle bit) pulling against a wedge of plastic that is fixed to the frame. They are typically one-way handles, however a locking deadlock cylinder is a possibility to add security.

Like the Espag handles, replacement handles for cockspur handles are simple to put in place, all you need is an additional set of screws (supplied) and the proper backset. The backset is measured from the baseplate to the underside of the nose of the handle. As a general rule Aluminium window frames typically have a 9mm backset, while UPVC employs a 21mm. There are also many variations, so it's important to take measurements prior to purchasing the handle.

The spindle or, in some instances the entire handle assembly can be removed by removing the handle. The new handle is installed by using a pair of pozidrivs screws. The pozidriv screws come in either a brass or zinc finish to match the existing hardware, and there is the option of a self-locking version.

This cockspur handle is simple to install and is perfect to replace or repair old uPVC Windows. They are an universal design, making them suitable for all profiles and backsets. Each handle is supplied with three packers of varying thickness. They are fitted to the underside of the handle nose and can be used in different ways to get backsets of 9-13mm 17mm, 21mm, and 13mm. The handles are available in both left and right-handed versions, as well as locks and non-lockable versions. They are also available with a variety of nose heights.

Turn and tilt

Tilt and turn windows are a coveted European window style that has been around for a long time in Europe but is just starting to catch on stateside. They combine the benefits of three window styles into one - tilt, pivot and in-swing. This makes them ideal for older homes, as they are able to provide a greater level of airflow than standard window styles.

When in the closed position tilt and turn windows lock as the normal fixed window. By turning the handle either 90° or 180°, based on the type of tilt-and turn window the sash will slide inwards, and the window will turn inward to allow air to circulate. This is a great solution to allow ventilation without having to open a large window, which can be a safety risk if not properly secured when opening.

If the handle is turned a further 90@ or 180@ the sash can be fully opened, much like doors. This allows for complete air exchange which is especially useful in rooms with a lot of draft or where smoke or other smells are likely to accumulate. This makes it easier to clean the glass's outside since you can do it from inside your home. This is a task that often requires a lot of risk.

Tilt-and-turn windows are also secure. When locked in a closed position, they are very difficult to open from the outside, and they have double seals to prevent rainwater from entering the house when in the tilted in-swing position. This is a useful feature for older homes, where burglars are more likely to target traditional windows that are opened from the side hinges.

Spade

There are a few different kinds of window handles that can be installed to double-glazed windows made of upvc. The two most popular types are Espag handles and Cockspur handles, then there's also tilt and turn handles blade or spade handles, and monkey tail handles. The kind of handle you pick will depend on your preferences and the type of window cost replacement you have.

It is important to know how the handle you have currently is attached to the frame in order to select the appropriate replacement upvc handle. This is called handing and is a vital piece of information, especially when buying online as some handle styles don't work with all windows. Some handles, for example, are angled while others are straight, and can be turned left or right. You should also know what the spindle length is and the distance from the base of the handle to the head of the handle.

Another important part of choosing the right handle is knowing whether your windows require a restrictor or not. They are usually employed in high-rise flats or commercial buildings, however they are not a requirement for homes that are primarily residential. Also, consider step height which is the distance from the bottom of the screw plate to the top of the handle.

Spade comes from Old English spadu, spaedu or spada and has been translated into numerous languages including German spaten and Low German spathen. In the 1920s during the Harlem Renaissance in New York City spade started to be used as a sexist term for black people. Since then spade has become a symbol of African American pride and heritage.

It is important to get the correct size when replacing a Cadenza-style handle. The handles are available in both angled and straight versions which differ by just a few millimetres. The handle head can change between a D and T shape, or be without handles at all.