Ghost 2 Immobiliser Installation: A Simple Definition

From Mournheim
Revision as of 00:18, 26 July 2024 by GonzaloBard4 (talk | contribs)
Jump to navigation Jump to search

Autowatch Ghost II Immobiliser Installation

Ghost immobilisers are the newest technology in vehicle security. They are revolutionary in how they protect your car from hacking, key-cloning & even wheel jacking.

The system requires the correct PIN code to start your vehicle. This is done via the buttons on your dashboard or steering wheel.

TASSA Approved

The new TASSA verified Ghost-II CAN immobiliser from Autowatch is a revolutionary device that was designed to combat recent car crime trends, including key cloning and hacking. The smart system is connected directly to the onboard CAN network of your vehicle, and prevents it from being turned on or driven in the event that you don't have the correct code. The system is completely undetectable and does not make use of radio frequencies or an electronic key fob, rather it lets you create a unique PIN sequence by using existing buttons in your vehicle, like those on your dashboard or steering wheel and can be changed at anytime. You can make the PIN up to 20 times long to ensure maximum security and an emergency code that is secure is available too.

The system communicates with the vehicle's CAN data network in order to identify when the PIN has been entered. The system then sends a message to the vehicle, which disables the ignition and engine, and shuts down critical components like the starter motor and fuel pump. The system features a "valet' mode that allows you to deactivate it and prevent valets or staff from driving your car without the correct key.

In contrast to traditional immobiliser relays which can be disabled with easily accessible diagnostic tools for professionals, the Ghost device relies on the onboard data network to communicate with the ECU and is not able to be tampered with. It's a sealed unit and therefore, it is impossible to access the circuits. This makes it almost impossible for thieves to hear that distinctive clicking sound that traditional immobilisers relays emit.

This technology is not vulnerable to jamming devices utilized by high-tech thieves. Furthermore, since it works on the CAN data network it's also unaffected by other diagnostic tools. This means it's a perfect anti-theft solution for every modern car.

We'll visit your home or office to complete the installation after you have booked the installation. We will walk you through the full demonstration with you, and then give you an owner's manual, an emergency card, two Autowatch window stickers and a installation certificate.

Insurance Approved

The Ghost is an aftermarket security gadget that safeguards your vehicle from the types of thieves who are interested in stealing your car. It prevents your engine from starting unless certain buttons is pressed. This sequence is only recognized by you, so when your car is broken into thieves, they will not be capable of starting it and are likely to leave your vehicle for fear of being caught. The ghost has a'silent' mode that turns off the vehicle when not in use. It can be disabled by pressing a button.

The system is fully TASSA (Tracker and Aftermarket security systems association) insurance-approved, which means it is recognized by some insurance companies as an additional security feature on your vehicle. It can be utilized in conjunction with other Thatcham-approved security measures, such as trackers, to prevent your vehicle from being taken. This will give you additional assurance.

Additionally it also communicates with your vehicles ECU on the CAN data circuit, which makes it undetectable to diagnostic tools and completely quiet. The Ghost is not able to be bypassed by a criminal simply by inserting an additional key to the vehicle or replacing the ECU. The system will only start your vehicle by entering the correct pin code. This unique PIN is only known to you and can be changed at any time.

The Ghost is a very subtle immobiliser that is fitted to almost all vehicles without wiring or the addition of aftermarket key fobs. It is directly linked to the vehicle's CAN data network, and a PIN code can be programed using the buttons on the dashboard and steering wheel. This code will stop the vehicle from starting unless the correct sequence is entered first. If the code is misinterpreted, there are secure emergency codes that can be reset with your mobile phone. There is an app that can be used on iOS and Android to decrease the requirement of entering pins each time, thereby providing greater security.

Discreet

An immobiliser, unlike a GPS tracker that only helps you find your car after it's been stolen, prevents the vehicle from ever being stolen in the first in the first place. This is accomplished by stopping the engine from starting unless it receives the correct code from the key fob, or a smartphone app downloaded to it. This is a fantastic way to avoid wheel-jacking as well as other types of theft, as the thief has no choice but to leave the vehicle alone or risk being caught.

The ghost immobiliser, which is a tiny weatherproof device, fits into the wiring harness of your car. It is connected to the CAN data network, and is hidden so that thieves cannot find it or disable it by simple wire cutting. The system comes with a service mode that can be set to let your garage work on your vehicle without needing to know the passcode.

Once the device is installed in your vehicle, it can be disarmed and then armed with an app on your smartphone. You can change the PIN number whenever you want to ensure that you are the only one who has access to your vehicle. This is useful if you plan to sell your car in the future in order to increase the price of resales.

Another benefit of the Ghost immobiliser is that it's discrete and won't leave any marks on the body of your vehicle, making it an ideal option for any vehicle. It's easy to fit it, is silent and won't disrupt any other systems in your car.

An immobiliser that is discreet will improve the look and feel your car. This is especially appealing for those who regularly use their cars to transport valuable goods, as it will help to keep thieves from pursuing them. A ghost immobiliser will work in conjunction with any other anti-theft system, like trackers to provide unbeatable protection for your vehicle.

Low Maintenance

ghost installations immobilisers work by connecting directly to the CAN data network. They are virtually unnoticeable, since they do not use LED indicators or additional key fobs. It doesn't emit radio signals and is completely silent so that thieves won't be able to detect it operating. The device can be concealed in a variety of locations (even underneath the floor mats) and is a great choice for those who wish to secure their vehicle without compromising on aesthetics.

This device stops your car from starting unless you enter the password that is unique to you. This is done using the combination of buttons on your dashboard and the steering wheel in a specific sequence. This makes it difficult for thieves to clone or hack into your system and will prevent them from starting your vehicle.

The Ghost will be alerted to boost your signal and prevent your vehicle from starting until the proper disarming code is entered. Unlike other security systems that can be activated through entering the wrong code or entering the wrong code, the Ghost will continue to block your car from starting until you type the correct passcode.

The Ghost remains in "service mode until you activate it by pressing the same combination of buttons that you used to arm it (this can be done when you visit your dealer for warranty or maintenance work). This is a security measure to ensure that it is not taken away by anyone who is not authorized and it is then rearmed and brought back to service mode when it is required.

It is also possible to transfer your Ghost to a new vehicle if you switch vehicles during the course of ownership, provided that the new vehicle is compatible. The most recent version of Ghost is equipped with QR finger prints that are linked to the International Security Register. This means that if you find your Ghost stolen to replace parts, it will be traced to you and your car. This will discourage thieves from stealing vehicles fitted with audi rs3 ghost installer since they'll know that the vehicle is secure and they would be risking being caught and convicted.