Double Glazed Window Repair: A Simple Definition
Double Glazed Window Repair
It is worth looking into the warranty included with the majority of double-glazed windows. It usually covers any problems with window hardware, like hinges and locking mechanisms in the first ten years.
A leak in the seal is typically the reason for mist to form between your glass windows. This needs to be fixed immediately to avoid damp or mould growing in your home.
Condensation Between the Windows
If condensation forms between the windows in your home, it's an indication that the seal holding the gas that is used to insulate between the panes has failed. This is a serious issue that should be addressed immediately particularly in winter, when humidity is at its highest. This could also cause damage to sills and sealants, as well as mould.
Ideally, double-glazed windows should never be able to experience condensation between the panes. This problem can be caused by high humidity or a very cold snap. Fortunately, this issue is repaired without replacing the entire window. A professional can make tiny holes in the window and then spray a special cleaning solution inside. The moisture is then sucked out of the window, and an anti-fogger device can be added to prevent any further buildup of moisture in the future.
Condensation between the windows can also occur due to air leakage or other factors outside of the window. If this is the scenario, it's likely to take longer for moisture to collect inside the window, since the air will need to be warm enough for the water molecules to vaporise. In these cases it might be more beneficial to replace the double-glazed windows rather than repair the seals on the existing units.
A double-glazed glass window is composed of two or more pieces of tempered, insulated glass that are joined by a framework made of metal. The space between the windows is filled with an insulating gas such as Krypton or argon, and then sealed. The seal prevents the gas used to insulate from escaping, and it also stops air and moisture from getting into the gap.
As windows age, seals may deteriorate allowing moisture to leak between the glass panes. When the seals leak, it is important to be aware of this since it signifies that the double glazing no longer performs as efficiently as it did before. This can result in poor energy efficiency, higher heating costs, a damaged properties and the risk of condensation between the windows.
Mist
If you notice condensation on the outside of your windows, it is totally normal - it means that your double-glazed is functioning properly and retaining the heat in your home. The condensation forms because the air outside is warmer than the glass and reaches its dew point before the window. This is one of the major advantages of having high quality double glazing.
If you see condensation on the inside of the window, this could indicate a ventilation issue within your home. This is because the extra moisture isn't going anywhere and is deposited on your window, in carpets, in furniture, and in other areas within your home. This can be prevented by having it examined by an expert and ensuring that there is plenty of fresh air in your home.
The other reason you might see mist on your double glazed window is that the seal between the two panes is breaking down. This can be caused by wear and tear or by using chemical cleaning products. The best thing to do is fix the windows in the shortest time possible.
The professional repair of your windows will ensure they remain waterproof and free of condensation, fogging and misting. It's also less expensive than replacing them completely and will also reduce your energy bills.
A FENSA registered window installer will offer a price for repair or replacement of your double glazed windows. Upgrade your windows to energy-efficient A-rated ones when they are old.
It is a very good idea to keep copies of any warranties and agreements with your window fitters. This will be very helpful if any problems with the windows arise in the future, and you then contact your window fitters to resolve these issues. This is a much better alternative to simply not addressing the issue that will only get worse and could cause other problems in the home.
Close or open without difficulty
If double-glazed windows are difficult to open and close it's not just a nuisance but it could also result in an increase in energy costs due to loss of heat and drafts. It can also be a security issue, particularly when the locks aren't functioning properly. It is essential to fix any problems with double glazed windows and doors as soon as you spot them.
If you can't open your window and you've tried the most basic of solutions like using a screwdriver in order to break it open, or tapping the frame with a hard object, the issue could be more serious. The window may have shifted and needs to be reset or there may be a gap between glass and frames. In either of these scenarios, you must contact an experienced double glazing repair expert to make sure that the proper repairs are made and to prevent future problems.
It is not common for UPVC window handle and lock mechanisms to become difficult to operate or stuck particularly if they're old and worn. It is usually caused by an accumulation of dirt or grease in the handle. This can be easily solved by cleaning it using a uPVC cleanser. If this doesn't work, you can try tapping the uPVC with a screwdriver. Be careful not to scratch the handle or window handle mechanism.
If this doesn't solve the issue it is likely that the window needs to be replaced because the hinges may no longer be in the proper position or the locking mechanism might have been damaged. In this case you should contact a specialist upvc window repair (learn more about Kingranks) expert.
David The Window Wizard specialises in all technical aspects of double-glazed window and door repair including fixing a jammed or shut double glazing window. He has vast experience converting discontinued window mechanisms to modern ones. This can often save you the expense of replacing the whole window. Call or email us today for more details or a free estimate.
Warping
Double-glazed windows are typically an excellent option to save energy in the home. They are composed of two separate panes that have a spacer or dense gas between them. This creates a seal which keeps cold air out and warm within. However, over time windows can become damaged or broken and require repair. Most of these repairs to upvc windows can be done without having to replace the entire window.
One of the most common issues double-glazed windows face is warping. This happens when the windows begin to flex or twist or bow. This can affect the structural integrity and insulation properties of the windows. Double-glazed windows must be properly installed and maintained to avoid this problem.
If your double glazed windows are beginning to crack, it's crucial to get in touch with a specialist immediately to help prevent the issue from becoming worse. They can inspect your windows and identify the reason for the warping. They will then employ special tools to fix the problem and ensure that your windows are completely sealed.
Water vapour can cause this issue because it may build up between windows over time. This could be due to various factors including the weather, humidity and temperature variations. To remedy this the expert will make tiny holes in the window to release the moisture. They will then apply an agent to clean the glass and then apply an adhesive to protect it from moisture in the future.
Alternatively, if your windows aren't able opened or closed, this may be a sign of a break in the mechanism or hinges. It is advisable to grease these areas of the window prior to calling a professional as this can often solve the issue and decrease the necessity for replacements. However, if your windows are very old or are not providing the level of insulation that you would like to see, it is often better to replace them.