17 Signs You Are Working With Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they do not corrosion or rot.

It is important to clean and oil UPVC doors and windows on a regular basis. This will reduce unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to take the time to ensure that you're doing all you can to ensure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the replacement will generally fit within the frame that was previously installed easily. If windows with double panes are held together by internal beading, it is difficult to remove and replace the old panes. In this instance, you will need to source some plastic spacers to assist the new pane to fit properly into the window frame.

If you are going to attempt to remove the window panes by yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric, not onto the floor which could cause them to be trampled under.

It's a great idea cover the gap with tape after the glass is removed. This will stop water and drafts from entering your home until a professional arrives to fix the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the gap is large, you may want to consider using an alarm door that comes with an integrated window as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could develop a variety of issues that include sliding. A sagging uPVC windows can cause issues with light, draughts, and even security. It's important to take action immediately if you notice your uPVC windows are falling down.

To fix a window that is sagging you can try repositioning the hinges. To accomplish this, you'll need to open the window so that you can access the frame. With a screwdriver, you can unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and test it for fit. If you're satisfied with the fit of the window, tighten the screws to keep them in place.

If you are unable to move the hinges, you could need to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause their tightness to decrease. It is essential to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

upvc window repair handles can also loosen up. This is typically caused by screws that have become undone over time, but it can be due to the handle mechanism wearing out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close the window and perform a test fitting. The corners of the sash must align with the casing joint. If it does not you can use a screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or not present.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the issue is, the old caulking may need to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk and then make the area harder to clean and can reduce the efficiency of your energy.

Check that any drainage holes have no debris in them and ensure that the sill pan is properly angled to drain away from the window. In more serious situations, you might need to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. This mold thrives in damp environments and can quickly spread throughout the home.

It is also important to remember that if the leakage originates from the glass in your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. Again this can easily be corrected by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open, or if it opens with the breeze. These are easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. Changing a window hinge is essentially a very simple process, but it's easier to do if you have someone to help hold the frame up.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. You can check this by looking for the arrows on each hinge. This indicates which way the window should be opened.

The problem can be caused either due to opening the window in the wrong way or due to a poor installation in the factory. This can often be resolved by sending us a photograph through our website and we will be more than happy to give you advice.

It is also crucial to grease the hinges regularly. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window open and close more easily. It also helps prevent corrosion and reduce the risk of sticking. This should be done at least every year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by various factors. Firstly the hinges, again because of wear and tear, could become misaligned. This will cause a gap to form where the sash joins the frame. If they are damaged beyond repair, it may be necessary to get them re-aligned. Second, the interlock can be disaligned. It is located on the hinge side and might require to be cleaned. In some cases it is possible to replace the hinges.

The next most common reason for draughts is window seals. These can become worn down or damaged over time, and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the possibility of draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your window repair sill. These will help to stop cold air from entering and keep your home warm and cozy!

With a little regular maintenance and repairs, your upvc windows will provide a great level of insulation and security for your home. It is important to remember that all windows eventually become worn out, and it could be cheaper to replace them than to repair them. If you are experiencing issues with your Upvc window, it's best to consult a professional as soon as you can.