15 Reasons To Love Window Repair
Window Repairs
Window repairs can save homeowners money and keep their homes warm. In the event of severe damages, like broken glass or a damaged frame, window replacement may be required.
Other issues can be fixed to extend the lifespan of windows. The most frequent issues are:
Cracked or broken panes
It's a rock that's been being tossed by your lawnmowers, or a tree's branch blown by high winds, damaged window glass is not only ugly, but it can also result in higher electricity bills as the broken pieces allow cold air to enter your home. Luckily, it's typically easy to repair windows that have broken panes.
Begin by carefully removing glass using gloves and glasses. You may have to use an utility knife to remove old glazing compound or putty around the frame's edges. Then, use a gentle cloth or paper towel to wipe the surface of both the glass and wood of the frame.
After cleaning the area, apply a silicone caulking that is water-proof around the frame's perimeter. This will stop water from leaking into the frame through the cracks and result in further damage.
If you have double-pane glass, cracks that are severe could damage the gas layer between the panes and make your windows less efficient in insulating. If the crack is serious enough to threaten the quality of the glass or if you have an inner pane that's totally missing, it might be time to call in a professional.
Cracks in thermal stress can occur when there's a significant difference in temperatures between the outside and inside of your home, causing the glass to expand or contract. If this happens to two windows, it's probably best to simply replace the pane instead of trying to repair it.
For cracked windows that aren't quite ready to be replaced, clear tape can do a decent job of securing the crack and preventing the entry of bugs and cold air. You can also cut a piece of nylon stocking or tarp that's large enough to cover the crack and glue it in place with duct tape. This is not an end-to-end solution, but it's a good way to keep cold air out and insects away from your home. If you notice cracks or blemishes on the windows of your old ones, you should check with your local business to determine whether replacing the entire window is a better solution.
Rotten Wood
Wood rot is one of the most common problems with windows. It can ruin a house's appearance and create a safety hazard. It is, however, possible to repair rotted wood. It is first necessary to determine the root of the wood decay. This can be done by looking for leaks in the roof or gutters that are not functioning, cracked caulking and any other areas which allow water to penetrate the wood.
The next step is to get rid of any rotten areas of the window frame. This can be done with the use of a chisel, rasp or claw hammer. After removing the decayed wood, you'll have to replace it with fresh wood. It is recommended that you make use of pre-treated wood for this project as it is resistant to rot. If you are not able to replace the rotted wood You can try using wood hardener or filler to repair the damaged area. Most hardware stores will sell this kind of product. Follow the directions on the label of the product to achieve the most effective results.
After you have repaired the rotten areas of the windowsill, it's important to protect the repaired area. Apply a water-resistant sealant to the wood. Sikkens, for example, is a great product to apply.
You can also use an epoxy filler that is two-part to shield the wood from further damage. This product is easy to apply and provides a good finish. However, it is very important to follow the directions for application on the label. Once the epoxy filler has dried, you can sand down the surface of the wooden. Start with a rough sandpaper, and then move on to an easier grade.
You do not want to expose the damaged part to further moisture. It is recommended, so, to protect the surface you have repaired with an oil-based primer which will shield it from water. After that, you can reapply the waterproof wood sealant.
The W won't open
There are many reasons windows don't open. Wood frames can warp in rainy weather, or the house might have sunk or someone might have nailed it shut for security reasons. With a little patience and the right tools, you can open the majority of stuck windows.
Accumulated debris or gunk can be a major cause of the window not opening. Acme Glass notes that dirt and grime builds up over time on the sliding tracks, hinges and locks. In addition, metal hardware can be rusty when it comes in contact with humidity or direct sunlight. Spraying grease on these areas to help prevent oxidation, and ensure that your windows are operating properly.
Stuck windows could be the result of an unintentional break or loosening of the pulleys that are used to lift and lower the upvc window repair near me. These components may lose tension and get blocked particularly when the window is at least two stories above the ground.
If you are having difficulty opening a door, try using a pry-bar to gently push the window open. Put a block on the frame of the window to give the pry bar more leverage. Be careful not to damage either the wood or the window. Try using a hairdryer to dry the frame's edges for a few minutes. This will warm the wood, making it easier to move.
A damaged spring can be the reason for windows that aren't able to raise or lower. You'll need to refer to the owner's manual for more information depending on who made your windows.
If you have tried cleaning the moving parts of your windows and lubricating them, but they're still not opening, it might be time to replace windows with new, energy-efficient windows from Homespire Windows and Doors. Don't let the windows in your home go from functional to unusable. If a window isn't properly shut can leave your home vulnerable for water damage and burglary. Contact us for more information on our windows replacement services and products today!