Five Killer Quora Answers To Patio Door Locks Repair
Patio Door Locks Repair
The locks on your patio doors are an crucial to your home's security. If they're not working properly, it can compromise the safety of your household and belongings.
Fortunately, a few easy steps can fix issues with your patio door lock and keep your home secure. This fast fix involves lubricating and cleaning the lock.
Check the lock
Patio doors are an essential security feature. They need to be able to withstand the elements and keep burglars out. Wear and tear, extreme temperatures, and dust can cause the door frames, hinges and locking mechanisms to fail. It is recommended to take a proactive approach in addressing these issues and to regularly inspect your sliding patio door lock repair door locks for indications of damage and make the necessary repairs.
One of the most frequent issues that can cause problems for your patio door locks is the difficulty locking or unlocking, a sticky latch, and a key that doesn't turn smoothly. Based on the specific issue you may have to tighten screws or adjust the lock mechanism in order to get it functioning properly again.
If the issue with the lock on your patio door is that it's stuck in the open position, you can try using a credit card or a flat-head screwdriver to pry it open. If these methods don't work, you should consider hiring a professional locksmith to help you open the lock without causing damage to the door frame.
The mortise lock that is used on sliding patio door repairs uPVC patio doors is typically a handle and a cylinder which secures the lock. The locks are safe however they can bend or break in the force of a open patio door that is slammed. It is a good idea to inspect the mortise lock and handle for signs of wear, such as bends or scratches, before it breaks and you need to replace it.
You can also take a photo of the lock to determine its dimensions and location. This will help you communicate these details to the supplier when you're seeking a replacement lock. This will ensure you get the right lock for your door and is compatible with the current mounting setup. It will be difficult to install the lock that's not compatible with the hardware you have already. This could lead to more complications in the future.
Clean the Lock
Patio doors are the most popular entry point into a home, making them a prime target for burglars. Therefore, it's essential that your patio door locks are functional and conform to Police & Insurance standards.
There are a few easy steps you can take to solve a lock that doesn't cooperate. It doesn't matter if you want to adjust the patio door or clean the lock, or even replace it, these four simple steps will ensure that your doors are operating correctly and offering the level of security that you'd like to have.
The first thing you should do is give the lock a good clean using hot soapy water and a damp towel. You'll want to clean away any stains or dirt that may have accumulated on the lock. After that you can use dry, clean cloths to get rid of any moisture and let the lock air dry before you attempt to re-insert.
Next, you need to lubricate the lock. This is particularly important for uPVC doors that are prone to becoming extremely noisy as time passes. You can use a spray oil lubricant, such as WD40 or petroleum jelly to smooth the keyways and internal mechanisms. After applying the lubricant on your key, clean it off to avoid redistributing any dirt that has accumulated.
After your uPVC patio sliding door repair doors are cleaned and lubricated, then test them. Examine if the door moves smoothly into and out of its frame. Also, ensure that the hinges and locking points are properly aligned with the frame of the door. You should be able see the alignment marks on the edge of the door frame and you can fix them by aligning the doors to the frame.
It's also worth noting that various types of uPVC door locks are available. It is possible to replace your lock if it is damaged or broken. If you own E2011 patio door locks, you will need to replace them to ensure that you are secure with E2469 and E2487 lock assembly. The assemblies comprise three parts: an E2014 mortise latch, an escutcheon plates and the lock hasp.
Lubricate the Lock
For the majority of patio doors, the lock mechanism is situated within the door, away from view. You can buy replacement kits at many locksmiths and home improvement stores in the event that your key cylinder has been damaged or you want to upgrade your lock to provide better security. These kits range between $10 and $20 and include a tool to open the lock and a spare cylinder. Follow the instructions included in the kit for disassembling and cleaning the old lock, and then install the new one. You may have to adjust the cylinder of your key slightly to ensure proper operation depending on how tight it fits in the lock hole within the door frame.
Dry graphite powder is used to lubricate locks. It is a low-cost and widely used alternative to liquid lubricants which attract dust and gum the mechanism. You can buy it at hardware stores, model trains shops, and some office supply stores. If you decide to use it, make sure the piece of dry graphite is free of tiny pieces of wood stuck to it. You can also buy an industrial graphite lubricant that is available in spray form. The solvent in the spray disperses when applied, leaving an uninspiring layer of graphite to lubricate the lock.
You can also lubricate your lock by applying several sprays of WD-40 directly into the keyway. Push your key in and out several times to spread the lubricant throughout the lock. After a few minutes, test the key again and check whether it turns effortlessly. If the key is stuck, try it again a few days after the WD-40 has dried.
Many homeowners can easily alter their patio door locks, but if your sliding door has an invisible latch or deadbolt lock that is built-in, the process could be more complicated. If your patio door has an invisible latch, you'll have to remove the decorative cover by removing the screws that hold it in place with the aid of a screwdriver. If your patio door is fitted with a deadbolt it will be necessary to take off the bolt. After removing the deadbolt and the knob assembly, you are able to install the new lock.
Replace the Lock
It's not unusual for patio screen door repair doors to malfunction. They are an important security feature for your home. Debris can get lodged inside the lock mechanism or it can simply wear out with the passage of time and use. A damaged or broken patio door latch could pose an extremely dangerous security risk to your home. A regular inspection of the patio door locks can help keep them in good condition and help you quickly solve any issues.
If lubricating the lock does not fix the problem then you'll have to replace it. Most homeowners can perform this task by themselves. However, it is essential to go through the directions to ensure that the new lock is compatible with the old lock. It's also an excellent idea to bring the old lock with you to the store to ensure that a customer service representative can guide you towards a replacement.
The first step in replacing the lock on a patio door repair door is to remove the handle. It is done by unscrewing the screws that keep the handle's interior in place. Once the handle is removed, you can then gain access to the screws that connect the lock body to the jamb of the door.
Once the screws are removed, you can lift the latch lever out of the door frame. Secure the latch lever using a graphite pen. It will fall into frame if it is not secured. The next step is to take the door strike from the jamb. This will reveal the hole that the lock hook goes into when the patio door is closed. After you have removed the old door strike, you can install the new one.
When re-screwing the door strike, you must be sure to use screws that are longer as they will be used to attach the frame to the strike. Also, make sure that the new strike is properly aligned with the opening in the door frame, and make sure you tighten the two parts.
There are various types of patio door locks however the most commonly used is the central rail key-operated lock. They secure the door to the frame in multiple places, and when the key is inserted, all points must be locked. These locks offer a greater level security than basic locking mechanisms and may result in a reduction on homeowner's insurance.