Windows Replacement Explained In Fewer Than 140 Characters
When it's Time for Window Replacement
It's time to replace your windows if they're no longer able to protect your home from the elements, filter noise or enhance the architecture. How do you start?
There are a myriad of factors to consider. Let's break down the process to assist you in making your decision the best one for you: style, energy usage and the labeling, installation and cost.
Energy Efficiency
One of the most popular reasons why homeowners choose to buy new windows is to conserve energy. Actually, replacing old drafty windows can reduce cooling and heating costs by up to 20%. Many people are disappointed to discover that their energy savings will not make up the initial cost of their new windows for a prolonged period of time.
Window performance and operation are vital aspects to be considered when replacing windows. If a window handle replacement isn't working properly can increase your home maintenance costs, utility bills and increase the possibility of air leaks. If your windows aren't moving up and down, or sliding side-to-side as they should be they should, you may have to replace them because the frames are warped or swollen from excessive moisture or the lack of sealing.
Another sign that windows need to be replaced is the presence of mold or mildew inside and outside the frame. This is usually a sign of a failed seal or damaged weather stripping. If these issues aren't taken care of promptly, the resulting mildew and mold can lead to health and safety issues for your family.
Replacement windows can also improve your home's security and curb appeal as well as the value of resales. These benefits are increased when windows used in a renovation are energy-efficient according to the National Fenestration Rating Council.
The efficiency of windows is measured by their U-factor. The lower the U factor, the greater the insulation power of the window. A U-factor less than 0.26 is an ideal rule of thumb. In addition to the U-factor, other aspects to consider when evaluating energy efficiency include frame material and design. Vinyl is durable and low-maintenance, but it can contract and expand when temperatures change. This could lead to leaks. Wood is a classic choice and offers better insulation, but requires regular maintenance. Aluminum is light and easy to maintain and is able to conduct heat quickly.
To get the best results, homeowners should seek out an experienced window installation professional to ensure that their replacement windows are installed correctly. A professional can also help you select the appropriate windows for your home's style and zone, and provide details on the resale value of windows and homeowner satisfaction.
Style
It's not a secret that windows are a significant part of the value of a house. It can be overwhelming to consider all the different types styles, styles and configurations that are available. It's not just about design or function- choosing the wrong windows can actually affect a home's selling value.
Window contractors use various methods to replace old frames with energy-efficient ones depending on their condition. One of them is a pocket replacement, in which a contractor removes the exterior frame but leaves the interior trim and sashes. Another option, usually recommended for older homes or older areas with strict requirements for grilles, is a sash pack replacement. These are standard kits that include wood or aluminum jamb liners and a replacement sash on both the upper and lower halves.
Another option is to install full-frame replacement windows. These will require the removal of the entire frame and the sash. This is typically recommended when the current windows are so worn that they're beyond repair. Full-frame installations are an option when the homeowner wants to change the window type like replacing double-hung windows with sliders or casements.
Look for replacement windows that bear the NFRC label. This label indicates the energy-efficiency rating of the window. The higher the rating the more efficient the window.
Before installing your new window, unlatch and take off the stops that secure the window. Work with care around the sill to avoid damaging the wood. If necessary then shim the frame. After the window has been put in and shimmed, you can shim both the top and bottom edge to ensure a tight fitting. Add caulk to the outside edge of the window to make it waterproof.
Fill any gaps that are greater than 0.64 cm (0.24 in) with foam-rubber backing rod. This is a much better option than caulk which can trap moisture, causing mold and wood rot. If your gaps are larger then you can add furring strips of 1 in (2.5cm) to the existing frame. This will increase the height.
Budget
The initial cost of window replacement is costly but it's worth it for the energy savings it offers and the increased quality of living you get from your home. It also increases the value of your house and lower your utility costs. It is important to establish a budget before you begin your project to guide your choices. Think about your family's needs for energy and the kind of windows you would like to install. A reputable contractor for windows can provide insight into your costs outside your personal budget and offer suggestions to reduce them.
Window frame materials are one of the major factors that determine replacement windows cost. Aluminum and vinyl are the least expensive options, while wood, fiberglass and composite frames are more costly. Be aware of the advantages and disadvantages of each frame material to help you decide the best one for your home. Wood windows, for instance are more durable and provide superior insulation, but they require regular maintenance and are susceptible to moisture damage. Aluminum and vinyl windows are less expensive, however, they are susceptible to rust and don't provide the same level of insulation as wood windows.
The window replacement company might offer different installation methods, which can affect the overall cost. The most labor-intensive is a complete replacement of the frame. This involves removing the entire window and replacing it with a new model. This is usually recommended when your existing frames have begun to rot or are damaged and is usually required for historic renovation projects. Insert window replacement is a cheaper option. During this process the existing operating hardware and sash are removed, but the exterior trim and siding remain intact. The new window unit is then inserted into the opening, insulated and sealed.
If you're doing the work yourself, you should take into account the cost of the tools you'll need. A tape measure, a shim made of waterproof material and caulk gun are all essential. Buy shims of various thicknesses for your window sills, head jambs and other sizes. You'll need elastomeric sealant fill in any gaps between the frame and casing.
Installation
Windows are available in various shapes and sizes to match the architectural style of each home. There are options for single-hung, double-hung sliding bay bow, casement circle garden, awning egress and jalousie windows. These windows are available in many different materials and finishes. Some are insulated to improve energy efficiency.
Replace your old windows that are inefficient with energy-efficient double-hung window to save money. The process is simple, but it's worth the effort. In addition to the cost savings, you will enjoy the benefits of a brand new, beautiful window.
Before installing your new window, remove the screen and sash of the previous frame. This will make it easier to move the window of the frame, and also prevent any damage to the window's materials. You'll need caulk to seal the frame on both sides and any gaps, if they are any. Use the caulk that is recommended.
You can choose to use shims made from plastic or cedar according to your preference and the condition of the frame. This will ensure that the window is placed correctly in the opening. Be cautious not to over-shim your window, however, as this may cause condensation and water to build within the frame, which can cause deterioration of the frame.
After the window has been installed the installer will ensure that the frame is level and properly caulked and plumb. Install any trim that was removed from the interior to make room for the window. Then, paint or stain the window to the color scheme of your home. Be sure to seal and insulate the sill, jambs and flanges on the outside of your home to further enhance the window's performance.