The 10 Scariest Things About Patio Screen Door Repair

Patio Screen Door Repair - How to Do it Yourself

A damaged or worn screen door isn't just unsightly; it provides an ideal entry point for flies, mosquitoes, and other pests. Although there are services that will repair your patio door repair company screen door, it is relatively easy to do the job yourself.

Lay the screen flat on a work surface. Remove the handle from that side by taking out the screws holding it in place.

Damaged Screens

It's not too surprising that your door or window screens will eventually develop holes and tears as a result of weather, pets, and children. Aside from being unsightly, these damaged sections allow pests and flies into your home. Fortunately, repairing the problem is fairly easy. While patch kits and screen repair tape offer an easy fix for minor damage, they don't work well on larger issues. This step-bystep guide will show you how to repair and replace your windows and doors for screen.

The first thing to do is assess the damage. Are there ways to salvage the frame, or does it need to be replaced? This is important because, generally window and door frame screens are more prone to damage than the mesh. A bent frame may cause the screen to become out of place and cause holes or weak spots.

After you've decided whether or not the frame can be salvaged, you can begin to tackle the mesh. You'll need a few tools to accomplish this task. This calls for a spline roll pressing the spline inside the frame, an utility knife and scissors. Utilizing these tools will ensure the highest quality and durability of your repairs.

If you are dealing with an extensive hole, start by cutting away as much of the old screen as you can to make a clear opening. Cut a new patch of screen material that is at least one half inch wider than the damaged part. The patch should be matched to your window's grid pattern If it has one. Trim the edges to eliminate any imperfections. Fold over the ends of spline to conceal them.

When purchasing your replacement screen, be sure to take into consideration the climate of your region. Fiberglass mesh is a popular choice due to its flexibility and cost, while aluminum screens offer the strength and durability of snag-resistant screens. You could also select a special insect screen mesh if your region is a victim of mosquitos and other pests. Whatever type of mesh you choose, make sure you stretch it tightly across the frame to prevent wrinkles or sagging.

Broken Rollers

A damaged roller on the screen door to your patio sliding doors repair can be a frustrating trouble. It's not only making it difficult to move your door however, it can let bugs and other undesirables to enter your home. The good thing is that fixing the rollers isn't as difficult or costly as replacing your entire door.

Start by examining the rollers to determine what the problem is. It could be that the wheel is flattened out, or maybe one end of the wheel has worn out by constant contact with the track. The wheels are generally mounted as a push fit on the bracket, so you might be able to put a screwdriver between the bracket and the roller, and try to lever it off. If you are unable to get the roller to lift off, it may be beneficial to spray the shaft with WD-40 prior to attempting again.

You should also look at the tracks from top to the bottom. Straighten bent tracks by hammering an object of wooden against the bent part. It's essential to clean the tracks, too, as they can trap sand and grit.

Once you have identified the type roller that is broken and you are able to purchase an alternative. Bring your old rollers to the hardware store so that you can be sure you're buying the right type. Some doors have more than one roller, so make sure to purchase enough to replace them all.

Before installing the new roller, use a screwdriver to loosen the bolts or adjustment screws on the inside of the door frame near the door rollers. Once the screws have been loose, you can remove the rollers from the bottom. This is best performed by a person else so that you don't need to use your hands.

After installing the new roller the door can be raised, and the bolts or screws for adjustment can be tightened. Verify the alignment of the track and rollers. If everything is properly positioned, your patio door repair service screen door will slide easily into its place.

Damaged Frame

There are several ways to fix your screen door rubbing against its frame. First, make sure that the hinges are tight. A door could be bowed if the hinges are loose. If they're loose, tighten the hinge screws. If this isn't working, you might require sanding the top of the frame to make it smooth.

A frayed frame is another common issue with screens. It can be costly to repair since the frame needs to be replaced. To avoid this, keep a watchful eye for signs of rot and treat them immediately if you notice them. Find signs of decay by looking for wood that appears darker than the rest of the frame. You should also keep an eye out for areas that have started to bow or warp. If you notice any of these issues contact a professional.

A mesh adhesive patch kit can be used to repair damaged frames. The cost of these kits is between $2 and $7. The kit comes with tiny pieces of mesh and glue that can be used to fix any holes in the screen. If the damage is minor, you can try to repair it using wood filler. To accomplish this, you'll have to apply the wood filler on the affected area and wait for it to dry before sanding it smooth.

You can buy a framelift, which is a metal structure bolted onto the frame you already have that lifts it up. This can be very expensive however it could be the best choice if your frame is severely damaged or is completely damaged or has rotted.

You can make an easy leg for your screen door by using a scrap of wood or an old display stand for a photo frame. Attach brackets or wires to the back to hang the frame on the wall. You can also add a piece of felt to the bottom of the frame to protect the wall from scratches.

Broken Splines

A damaged screen spline can be as difficult to deal with as damaged doors or frames. It might seem like a problem that can be ignored. But if you let it go for too long, pests such as insects and mosquitoes can get through. This can quickly turn into an issue that is more serious that could lead to costly repairs or a new screen door.

It is not difficult to replace a broken spline, particularly when you have the proper tools. You will first need to remove the old screen door spline. You can do this by laying the frame of the screen door flat on any surface like a table or a floor. Remove the spline by using a screwdriver. If the spline has gotten extremely worn or brittle it may break as you attempt to take it from the groove.

When you're removing the old spline, ensure that you remove any caulking used to keep the spline from moving. This will ensure that the new spline is properly fitted in the grooves.

After you have removed all of the old spline, you can use a knife to cut any excess screen from the frame. This will ensure a snug and smooth fit on all sides of your frame when you install the spline.

Installing the new spline is simple after you've cleaned the frame and cut the new screen material to the appropriate size. Start with one of the shorter sides of the frame. Lay the spline in place and then begin rolling it using your splining tool to work it into the screen channel. Continue rolling the spline, and pushing it into the screen channel as you move. Continue this process on each side of the frame. While you are working, use tape or spring clamps to keep the screen taut.

Repeat the process for the second side once you've completed the splining of all short sides. Complete by splining both of the bottom and top edges of the frame.