The 10 Scariest Things About Patio Screen Door Repair

Patio Screen Door Repair - How to Do it Yourself

A worn-out or torn patio screen door is not just ugly, but it also provides an easy entry point for pests like mosquitoes and insects like flies. While there are companies to repair your patio door repair service near me screen door, it is relatively easy to do the work yourself.

Lay the screen flat on a work surface. Take the handle off by taking out the screws that secure it.

Screens damaged

Between the elements, pets and kids, it's no surprise that tears and holes are bound to be found in your window or door screens. The damaged screens aren't only ugly, but also allow insects and flies to enter your home. Fortunately, fixing the problem is fairly easy. Patch kits and screen repair taps are quick fixes to minor damage. However, they do not work as well on larger issues. This step-by-step guide will show you how to properly repair patio door lock and replace your screen doors and windows.

The first thing you need to do is determine the damage. Is it possible to salvage the frame, or will it need to be replaced? It is important to take into consideration this since windows and door screen frames are more likely to be damaged than the mesh. A bent frame could pull the screen out of alignment, which can result in holes and weak spots in the mesh.

If you are able to determine if the frame is salvageable or not, you can begin working on the mesh itself. You'll need a few tools to complete the task. This process requires a spline roll for pressing the spline in the frame, a utility knife and a pair of scissors. Utilizing these tools will ensure precision and durability in your repairs.

If you have a large hole in your screen, begin by removing as much possible of the old material to create a new space. Then, cut a patch of the new screen material in a way that it is at a minimum half inch bigger all around than the damaged area. If your window has grid patterns, be sure that the patch matches to it. Trim the edges to eliminate any imperfections. Fold over the spline's ends to conceal them.

When purchasing your replacement screen, make sure you consider the climate in your region. Fiberglass mesh is a popular choice because of its flexibility and affordability as well as aluminum screens that offer durability and snag-proofing. You may also wish to opt for a specialized insect screen mesh if you live in an area that is a victim of mosquitos and other insects. Whatever type of screen material you choose, make sure that you stretch it tight across the frame to avoid wrinkles or sagging.

Broken Rollers

A damaged roller on your patio screen door can be a harrowing inconvenience. It can make sliding glass patio doors repair the door difficult and allow insects to enter your home. The good news is, fixing your rollers won't be nearly as expensive or complicated as replacing your door.

Start by examining the rollers to determine what the issue is. It may be that the wheel is flattened out, or maybe one end of the wheel has worn out by constant contact with the track. The wheels are usually a push fit on the bracket, and you might be able to insert an screwdriver between it and the bracket and then try to pull it off. If you're unable to get the roller to lift off, it may be beneficial to spray the shaft with WD-40 prior to trying again.

It's recommended to take a look at the tracks, both at the top and bottom. Straighten bent tracks by hammering a piece of wooden against the bent section. It's essential to clean the tracks, as well because they can hold dirt and sand.

Once you've identified the type roller that is broken, you can buy a replacement. Make sure to bring your old rollers with you to the hardware store to ensure that you buy the correct type. If your door has more than one roller then you'll need to buy enough to replace all of them.

Use a screwdriver to the inside of the door frame, near the rollers to loosen the screws or bolts for adjustment. After the screws are loosened, you can remove rollers from the bottom. It's best to have someone assist you in this step, so that you can free up your hands and focus on removing the rollers.

Once the new roller is installed, the door can be raised back into place and the bolts or screws that adjust can be tightened. Make sure to verify the alignment of the rollers and track, as well. If everything is in order the sliding patio door lock repair screen door should slide easily into place.

Damaged Frame

There are several ways to repair your screen door that is rubbing against its frame. Check that the hinges are tight. Doors can become sluggish when hinges are loose. If they're loose then tighten the hinge screws. If this does not work, you might need to sand down the top of the frame.

A frayed frame is another common problem with screen door. It can be costly to repair since the frame will need to be replaced. To avoid this, keep alert for signs of rot. Treat them as soon you spot them. Look for signs of rot by looking for soft wood that looks darker than the rest of the frame. Be aware of any areas where the wood is beginning to bow or warp. If you find any of these issues you should contact an expert.

A mesh adhesive patch kit can be used to repair damaged frames. The cost of these kits is between $2 to $7. The kit includes a tiny piece of mesh and glue that can be used to cover any holes in your screen. If the damage isn't too severe you can attempt to repair it with wood filler. To do this, you'll have to apply the wood filler over the area that is damaged and then wait for it to dry before sanding the area smooth.

You can buy a framelift, which is a metal structure that is bolted on to your existing frame that lifts it. This can be very expensive however it could be the best option if your frame has been severely damaged or is completely decayed.

To create an easy stand for your screen door, you can create a leg from a scrap piece of wood or a picture frame display stand. Attach brackets or wires to the back of the frame, allowing you to hang the frame on the wall. You can even attach a piece of felt to the bottom of the frame to shield your wall from scratches.

Broken Splines

A broken screen spline can be just as annoying to handle as a damaged frame or door. This may appear to be a problem that can be ignored. But if you leave it unattended for too long, pests like insects and mosquitoes can get through. This can quickly escalate into an issue that is more serious and result in costly repairs or a new door screen.

The positive side is that replacing the broken spline is relatively easy and inexpensive, especially when you already have the equipment. First, you'll need to take off the old screen door spline. This can be done by laying the screen door frame flat on a surface like a table or a floor. Use a screwdriver to pry open the free end of the spline and pull it out. If the spline has gotten especially worn or brittle, it may break as you try to remove it from the groove.

When you take off the old spline, make sure you remove the caulking that was used to hold it in place. This will ensure that the new spline will be capable of fitting into the grooves.

Once you've removed all the old spline a knife to cut any excess screen off around the frame. This will ensure a tight and smooth fit across the entire frame when you install the spline.

Installing the new spline is straightforward after you have cleaned the frame and cut the new screen material to the appropriate size. Begin with one of the shorter sides of the frame. Roll the spline into the screen channel using your splining device. Continue rolling the spline and pushing it into the screen channel as you go. Repeat this process on each side of the frame. While you work try to keep the screen taut by using tape or spring clamps.

After you have splined all of the short sides of the frame move to the other side and repeat the process. Finish by splining both the bottom and top edges of the frame.