Why No One Cares About Upvc Window Handle Replacement
UPVC Window Handle Replacement
Replacing a broken window handle is a simple process and, with the right tools, it can be done quickly. However, it is essential to identify the type of handle and the spindle length before buying a replacement.
Older uPVC replacements windows feature cockspur handles for windows. They have a spur that protrudes to lock over a cockspur wedge striker plate. These can be right-handed or left-handed and should be compatible when replaced.
What type of lock or handle do you have? I have
There are many window locks and handles made from upvc each with their own advantages and purposes. The type of handle you have will determine how easy it is to open your windows and if the locking mechanism functions according to the plan. As time passes, and with regular use, the upvc handles on your windows can become damaged and worn out. This makes them less secure and less effective. In some instances, they could even fall completely off. It is important to repair your upvc window handles as soon as you begin to notice them falling off. This will avoid burglaries and ensure your home is secure.
The good news is that replacing your upvc window handles is a fairly simple job that is achievable by almost everyone. With just a few tools and the right information it's a straightforward procedure that should take no less than a few minutes. You will need to know the kind of lock or handle you have on your window. This will allow you to choose the appropriate replacement.
Inline Espagnolette Handles
They are the most popular kind of upvc handle and are usually placed on the side of your window. They are flat and come with an opening that engages the locking mechanism of the window frame. Inline upvc handles also come with a spindle that runs through the center of the handle and then into the window frame to operate the latch.
Cockspur Handles
These handles are usually found on older uPVC window frames and feature an unusual hook-shaped design. Cockspur handles are secured to the frame of the window by one screw, and are less secure than other types of window handle.
Tilt and Turn Handles
Unlike the other handles made of upvc, tilt and turn handles can be rotated to open the windows and tilted inwards to let air flow in. They have a 7mm spindle in the back and are available in right and left-handed versions.
It is crucial to determine the spindle's size prior to purchasing a replacement double glazed windows upvc handle. Not all of them are the exact same size. Drop something in the middle of the hole to test the length. This is the length of the spindle that will be suitable for your window.
What is a spindle?
uPVC window handles operate in a similar way to doors, by turning the handle to open an opening inside the frame. The window then opens and shut. However, sometimes handles can be damaged, especially when they are used frequently or exposed to extreme weather conditions. This can lead to the need to replace your uPVC windows handles as they may not be able to operate the window correctly anymore.
There are many different kinds of uPVC handles that are available, comprising Espag, Cockspur and Spaded handle options. These handles are designed to fit into the uPVC frames in different ways, and each type of handle has a particular spindle that is used to lock the mechanism fitted into the window. This is why it is essential to know what kind of handle is installed on your uPVC window so you can get the correct replacement.
You can find out what kind of uPVC handle you have by looking at the base section of your handle. A snap-in cover should be over the screw that holds the base of the handle in place. Remove this and then you should be able see the second holding screw on the opposite side of the base section of the handle. Once both screws have been removed and you are able to pull the handle from the uPVC.
After taking off the uPVC handle, carefully unscrew it from the locking mechanism. Take careful note of the length of the spindle as you will need to ensure that you buy one that is the same length as the original handle and locking mechanism.
The most common issue with uPVC window handle problems is that the spindle gets worn out and can no longer work with the locking mechanism. This could be due damage caused by constant use or loosening of the locking mechanism, or even corrosion over time. If this occurs, you will have to replace both the window handle and the locking mechanism in order to restore the full functionality of your uPVC Windows.
How do I get rid of my old handle?
In the course of time and daily usage, window handles could become damaged or broken, and if this happens, it is important to repair them as soon as possible to ensure the safety of your home. It is simple to replace a damaged or worn handle. The task can be accomplished in less than one minute without the need of special tools.
To take off the handle, you first need to remove the screw that is located at the bottom of the handle. Once this is removed the handle can be removed from the base. A second screw will be located at the base of the handle. This too can be removed. After both screws are removed, the handle can be removed from the base of the window.
After removing the handle and fixing holes, align the holes of the new handle with the existing holes in the window frame. There may be a tiny sticker or caps on the new handle, so take off them if needed and then screw the handle into place. Once the handle is in place it is important to test that it is working by turning the handle, and ensuring that the lock mechanism activates.
Espag handles have an elongated spindle that extends from the handle and slot into a multipoint locking mechanism inside the frame of the window. Cadenza windows have a blade with cutouts which fit into the lock mechanism. Cockspur handles are long and hook over the frame that surrounds the window or the transom bar crossmember.
After you have put in the new handle, slide the spindle into the window lock and tighten it. Replace the snap-in cover and screw cap (if applicable) after the handle is fixed. The handle is now ready for use, so try opening and closing the window several times to ensure that it works correctly and securely.
How do I fit the new handle?
Changing your uPVC window panes Replacement handle isn't a big deal and the process is actually very simple. All you need is a screwdriver and little bit of patience. First, make sure the handle is not locked. Then, remove any visible screws. You can also replace them using screw caps. After you have removed the handle, you will need to note the length of the spindle that extends from the back. This is important as it will determine the kind of handle you'll need to purchase.
Espagnolette handles that are made of uPVC are the most sought-after kind of handle. They have a spindle that is connected to the handle and acts as an internal locking mechanism within the window frame. When the handle is turned, it opens the latch on the window, allowing it to open. In regular use and over time, espagnolette handles may become damaged.
Cadenza handles are another type of uPVC window handle, which is typically used on tilt and turn windows. They have a protruding blade that operates the multipoint locking mechanism inside the window. They are more secure than an espagnolette handles since they only open from the inside. You can replace them with the same method that you would for espagnolette handles, but make sure the new handle is angled, not flat.
Once you have selected the right handle, simply align the new handle with the existing screw holes before screwing it into place. You should then put the screws back on and test that the new handle is working correctly. This is done by moving the handle from the locked to the unlocked position and then back to the locked position several times. If you encounter any issues, it could be worth contacting a specialist to see if they are able to help resolve the problem. They are often able to advise you on the best solution to solve the issue in a fast and effective manner.