The 10 Scariest Things About Sliding Patio Doors Repair

Sliding Patio Doors Repair

Patio doors that slide open are an excellent way to take advantage of your outdoor space, however they can become difficult to open and close. This can be due to a range of issues, such as dirty tracks or rollers that are not aligned properly.

Start by cleaning the track and Lubricating the rollers. You can also adjust the rollers using the adjustment holes that are located on the bottom side of the movable door panel.

Tracks that are damaged or dirty

A damaged or dirty track can cause the sliding door to not slide properly. Over time dirt, grit and even rust may accumulate and block the track from being able to move smoothly. A gentle detergent and a brush will do the trick. This job should be done regularly to ensure smooth operation and to prevent expensive repairs in the future.

A door that is leaking can be a common problem. It needs immediate attention to prevent structural deterioration, water damage and mold growth. Most often, the issue is due to damaged weather stripping or misaligned doors, which can be fixed by replacing old weather strips and aligning the door.

Another issue that is common and can be solved with a bit of DIY work is rollers that jump off the track. This is a task that can be challenging so you may need a helper to help you. In the house, and lean a panel toward you to reposition the rollers. When the panel is lifted off the bottom track, you'll need place it on sawhorses to prevent it from falling off. Then loosen the screws that hold each roller in place, and take them off with a screwdriver. Now you can remove any dirt stuck between the wheel and tracks. Then, clean each wheel by rubbing denatured alcohol on a rag. Reposition the wheels on their tracks and then attach them once more.

It may be possible to straighten bent track sections using a mallet made of rubber and a piece of wood. However, if the bent section is located near the hinges and has the potential to cause further damage, you'll better off calling in an expert for safety reasons.

Rollers that are misaligned

If your sliding door is having a problem sliding, it's most likely that the roller wheels are not aligned correctly. The wheels could be dirty, rusted, or their bearings have worn out. This creates friction between the bottom of the door and the track, which causes it to snag or grind when it's shut or opened. This can also trigger squeaking sounds.

Fortunately it's a simple fix. It is not necessary to take off the door to access the wheels, since they are on a bracket which is adjustable. Use a screwdriver and locate the adjustment holes on the frame (usually either side). Turn the screws to turn the wheels. Turning the screw clockwise will raise the wheel while turning it counterclockwise lowers it. Continue to adjust the door until it opens and closes easily.

It's important to adjust the wheels before making adjustments to the latch. To ensure that the lock functions properly the latch hooks have to be aligned with the strike plate. If you do not do this the latch could open or close accidentally while you are out of the room.

Sliding patio door are an investment. Making sure they are in good working order will ensure the safety of your family. You can avoid costly repairs by addressing the most common issues, such as broken tracks, rollers and handles. For more help with your patio doors, call our team. We can evaluate your needs for repair of your sliding patio door and assist you in keeping it in good shape. Our professionals can also assist with any replacement parts you may need.

The door frame is loose or damaged

Sliding patio doors are a wonderful option for any home and offer a stylish and practical alternative to hinged or swing-open patio door lock repair door options. Like other hardware items sliding patio doors may become problematic over time. Fortunately, many of these issues are easy to fix with a bit of DIY expertise.

A gap in the frame is a typical problem with sliding glass patio door repair patio doors. It could be due to a variety of factors, including rollers or tracks that are not aligned properly, a damaged track or door, or a bowing door frame. Most of the time the reason for this issue can be resolved by removal of the door and reconnecting the track or rolling elements. This must be done with extreme care so as not to cause damage to the track or frame.

In some instances, it might be required for the entire track to be replaced. This can be done easily using an universal kit, which is available in all major hardware stores. These kits are easy to install and will get your door working properly in no time.

It is important to inspect the frame of your sliding door and hardware for signs of wear and tear, such as loose bolts or screws. This is an easy and effective DIY patio maintenance task that is done using a screwdriver. It is also essential to oil the rollers tilt and slide patio door repairs near me tracks of your patio door to ensure smooth operation and prevent premature wear.

For many homeowners, their patio doors are the main entry point to their backyard as well as outdoor living space. Therefore, they have to to function correctly to maintain the comfort of their home and offer security. By taking the time to implement these easy maintenance tips, homeowners can prolong the life of their sliding patio doors and minimize expensive repairs or replacements.

A faulty handle

Patio doors that slide open are ideal for allowing you to get into your home and access your backyard, but they can be difficult to operate if they are misaligned. A faulty handle can also cause the door to get stuck or be difficult to open and close. The good part is that repairing loose handles is a simple task that can be done at home.

In many instances, a loose handle is simply the result of screws that have worked through the backplate. To fix the issue tighten the screws on the inside of the handle with a screwdriver. If you find that the handle remains loose, it could be a sign that the threads have worn and will need to be replaced.

Or, a damaged latch could be the cause. This is more likely to occur if the latch is made of plastic instead of metal. If the latch isn't turning or catching it, try oiling it first to see if this aids. If not, you could need to replace the lock completely.

If the handle is cracked or broken, it can be difficult to use. If this happens, it will be necessary to replace it with a new handle that matches the style of your sliding patio door.

Feldco can help you restore your patio doors to their former glory, whether they are new or outdated. We have doors of high-quality in different sizes and styles that can be installed to match your home perfectly. For more information about our products, call us today! We provide homeowners with our services in Southern California, including Ventura County, Orange County & San Diego County.

Faulty weatherstripping

It's time to upgrade your weather stripping if you see light around closed doors and windows, or notice a draft pushing towards the door or window. The strips form an airtight seal, which stops unwanted water, air and pests from entering the home. It also helps keep your conditioned and heated air in, saving you energy costs all year round.

It may have lost its strong, bouncy seal due to age. This is easy to diagnose by taking a dollar bill and putting it under the seal along the top of the door frame as well as the bottom of the door jamb where the two meet. If the dollar bill slides between the seal and door with ease, it is time to replace the weatherstripping.

It's tempting to cut off only the worn section of weather stripping and then replace it, but this will cause cracks on both sides of the new stripping and could cause problems with the seal in the future. It is much more effective to replace all the stripping. This will let you rest assured that your door will be sealed properly.

Follow our DIY guide to weather stripping and install the right material on your sliding patio door and frame to ensure a secure and long-lasting seal. It's a great method to fix your door and cut your energy bill Don't put off the project until it's too late. Your wallet as well as your home will be thankful.