Guide To Replacement Upvc Window Handles: The Intermediate Guide In Replacement Upvc Window Handles

Replacement Upvc Window Handles

Most replacement upvc window handles include everything you require but if the original handle was fitted with screws or pins that were holding it, they will need to be removed. Remove the'snap-in' cover at the base of the handle.

The next step is to identify what type of window lock and handle you're replacing. This is important!

Espag

Espag handles are a set of multipoint locks suitable for casement windows such as uPVC or wooden double glazing. They feature a 7mm square spindle that is fitted into the gearbox of the uPVC window. When the handle is turned, it opens with a series of locks that run around the perimeter of the window. Espag handles, also known as shootbolts, provide more security than the single point lock that is found on older window frames.

They are available in a number of different styles, such as inline and cranked handles that can be used for either left or right hand operation. There are also ergonomic handles that enhance the appearance and feel of your window, as well as the handle.

If you're looking to replace your existing upvc window lock replacement window handle with an espag type handle, you'll have to determine the size of the spindle installed and measure the measurement from the base of the handle in order to get the right replacement. This measurement, known as the step height will help you choose the best uPVC window handle for your home.

If you have to remove any screws that hold the handle, you can use pliers or a screwdriver. After this is done then you must disassemble the handle by taking out the screws or pins that secure the spindle, and then pulling it away from the window.

Once the handle is removed, you will then be capable of accessing the locking mechanism within the frame of the window and remove the wedge block for cockspur which is fitted adjacent to the handle, allowing the window to open. The replacement handles for upvc windows uPVC window handles that you've purchased will now be able to fit on the cockspur wedge block, and then into the handle spindle which will allow the window to open again. If you want to be sure that your uPVC handles are properly secured you should replace the cockspur block a brand new one.

Cockspur

Cockspur handles are typically found on older uPVC and aluminium windows. The handle is closed and rotates into a wedge-shaped receiver catch. (Not to be confused with timber latches, which are also covered in this section.) The handles are lockable or non-lockable. They come in a range of different nose heights to fit the existing frame.

The handle is secured with a small triangle-shaped spur (spur) which is fixed to the frame. These are usually one-way handles, however a deadlock with a locking mechanism can be fitted to provide additional security.

Like the Espag handles, the replacement handles for cockspur handle are simple to put in place all you need is an additional set of screws (supplied) and the correct backset. The backset is measured from the baseplate to the nose on the underside of the handle. Aluminium window frames are typically 9mm wide, whereas UPVC is 21mm wide. There are a myriad of variations however, so it is crucial to take a measurement before purchasing the handle (see the video below for more details on how).

The spindle, or in some instances, the entire handle assembly is removed by unwinding the handle. The replacement handle can then be screwed into place with a pair of pozidriv screws. The pozidriv screw comes in a brass or zinc finish to match the hardware you already have. There is also an option for self-locking pozidriv screws.

This cockspur handle can be simple to install and is ideal to replace or repair old uPVC Windows. They have an universal design, making them suitable for all profiles and backsets. Each handle comes with three packers, each having different thicknesses. They are slid on the underside of handles and can be combined to achieve backsets as small as 9-13mm or as high as 21mm. The handles are available in left and right-handed models, as well as lockable and nonlockable models. They are also available with a variety of nose heights.

Tilt and turn

Tilt and turn windows are a popular European window style that has been around for decades in Europe but is beginning to gain traction stateside. The windows combine the functionality of 3 window styles - tilt, in-swing and pivot. They are perfect for older homes as they provide more ventilation than standard windows.

When tilt and turn windows are closed, they will lock as any other fixed window. By turning the handle either 90° or 180°, based on the type of tilt-and-turn window the sash opens inwards, and the window will turn inwards to allow for air circulation. This is a great method to ventilate without opening a large potentially dangerous window.

The sash can also be fully opened by turning the handle 90@ or 180@. This permits complete air exchange, which is particularly useful for draughty houses or rooms where smoke or other smells are likely to accumulate. It also makes cleaning the outside of the glass much more easy because it can be done from inside the house which usually requires ladders that are a bit shaky.

Tilt and turn windows are extremely secure. They are difficult to open when they are locked in the closed position. They also have double seals which stop rainwater from entering your home when it is in the tilted position, or in swing. This feature is particularly beneficial for older homes where burglars tend to target traditional windows that can be opened using side hinges.

Spade

There are many different kinds of handles that can be installed on double-glazed windows made of upvc. The two main types are Espag handles and Cockspur handles. There's also tilt and turn handles, spade or blade handles, and monkey tail handle. The type of handle you select will depend on your preference and the type of window you have.

To select the correct replacement for your window handle, you have to know how the existing handle is attached to the frame. This is referred to as handing and is a crucial piece of information to know when purchasing online. Some handle variations are not suitable for all windows. For example, some cockspur handles are angled, while others are straight and will either turn left or right. You will also need to know what the spindle length is that is the distance from the base of the handle to the top of the handle.

Knowing whether or not your windows require a restrictor is also essential when choosing the appropriate handle. These are typically used in high-rise flats or commercial buildings, however they are not a requirement for homes that are primarily residential. You should also take into consideration the step height, which is the distance between the screw plate and the nose of the handle.

Spade is a word that comes from Old English spadu or spaedu and has been translated in several languages including German spaten and Low German Spathen. In the Harlem Renaissance of the 1920s in New York City the word spade was used to mock black people. Since the time spade has been an emblem of African American pride and heritage.

It is essential to choose the right size when replacing a handle made of Cadenza. The handles are available in both angled and straight versions which differ by only a few millimetres. The handle head is available in a variety shapes such as a T or D shape. It is also possible to be left with handles.