What Experts Say You Should Be Able To

How to Replace the Replacement Key Battery For the Saab 9-3

saab key replacement cost owners have to follow a series of special steps to install a second ignition key. This requires the use of a handheld computer called Tech-2 which is used by the dealer. Then, a new transponder and key have to be purchased.

It is recommended to rotate your keys in order that one does not get worn out more quickly than the other. This will help to keep your keys in perfect condition.

Replacement Case

Contrary to the classic Saab keys of old, the new key fobs are equipped with electronics that make it difficult to create a duplicate. This has made theft of cars considerably more difficult than it was years ago. However, it also has made the replacement of lost keys a comparatively expensive task.

Every owner of a Saab 9-3 should have at least two functioning keys. If one is lost, it is expensive to get another one for the vehicle because it requires replacing the CIM module and reprogramming the locking cylinders. Dealers charge between $100-$200 for this.

There are ways to cut down on these high costs. Some parts dealers will search for the code on an extra key (usually the same one that opens the doors and turns off the ignition) and cut a brand new metal key blade at only a fraction of the dealer's cost. The key, however, must be the same as the original one to function properly in your vehicle.

Follow these steps to replace the case. You'll require a flathead screwdriver as well as some patience. With the screwdriver, slowly tear the plastic away and remove the emergency key from the case. Once the case is open take the electronics out and place them into your new case. Place the key with the correct badge into the case.

Replacement Battery

The replacement battery for the Saab 9-3 is an inexpensive component that can be replaced quickly and easily. This YouTube video from Cyclone Cyd demonstrates how you can replace the remote fob battery with just four easy steps. This tutorial should work with any modern Saab key fob. However, the process might differ slightly.

The button is typically located near the saab 93 key programming logo on the back of the fob. This button is usually located next to the saab key replacement near me logo on the back of the fob. Then you will need the flathead screwdriver to insert into the tiny hole in this button. This should be enough to unlock the fob's case so that you can replace the battery.

After the new battery CR1632 is in place it is possible to reassemble the remote key fob. You can then program it to your car. The entire process should not take more than an hour or less. This is a straightforward process that doesn't require any special tools.

The process can be a bit more complicated if you've lost your key, but it's possible. The dealer has to verify the VIN of the car, and then request a replacement key blade and TWICE module, both with the correct unique code. After that, they will need to cut the replacement key and then program it using an innovative software tool called MDI.

Key Replacement Fob

The key fob is the piece that locks and unlocks your car. It has a battery inside. Batteries are able to last for a short time and will eventually fail. This is a problem that occurs in all vehicles. The good thing is that you can change the batteries in most key fobs, and not have to replace the entire case. Amazon sells fobs for replacement that already have all the electronics installed. It is easy to open the case and replace the batteries. You will need to remove the emergency key before you replace the batteries. To accomplish this, simply insert the screwdriver of a small flat head into the slot that is in the middle. The screwdriver should be moved around the case until it is split open, making it easy to remove.

If you're ready to replace your keys, keep a spare in your possession. This will save you a significant amount of money. If you have a spare, you can ask the dealer cut an entirely new key and then program it to your car, which is cheaper than replacing the entire key fob.

It is possible to add a second key to your vehicle If you don't already have one, but it will require some research and effort. Adding a second key costs several hundred dollars and also requires programming of the car's computer. This can be done by a professional, but it's an expensive option for the majority of owners.

Replacement Ignition

As opposed to earlier Saab vehicles, the latest SAAB 9-3 models feature an upgraded alarm system that is built on a key code. This means that in the event that you lose your only working key, adding another one can be very expensive since the car has to have a special computer module installed and it must also be programmed to accept a new key. Dealers can even charge hundreds of dollars to program the new key in the event that they are unable to complete the task.

If you've lost the only working key, programmer a dealer will replace your car's computer (known as the CIM or SAAB TWICE) to make the replacement, and will charge you the highest price for it. We can reprogram the current EEPROM inside your car's computer so that it is prepared for a new key. This will save you more than 50% on the price you'd have to pay a dealer.

If you've owned a car like the SAAB 9-3 for an extended period of time you're aware that the ignition keys are not very durable. They can get extremely sticky, and the buttons can fall off from time to time, so you should consider purchasing a new one if yours isn't functioning properly. Luckily, replacing the ignition key isn't as difficult as it seems, and it can be done quickly using the appropriate tools.