What Experts Say You Should Know

How to Replace a Kia Sportage Replacement Key

For a number of Kia models the key comes with a keyless entry system built-in. This key is similar to remote controls and can be exchanged with a Kia dealer.

Key fobs can fail to function due to a number of reasons, including an inactive battery, worn out buttons signal interference, or water damage. Here are some guidelines on how to get your Kia Sportage replacement key back to working.

How do you replace the remote key or smartkey?

No matter if your Kia comes with an intelligent key, remote key push to start key or a regular non-transponder steel key, the battery in these keys will eventually require replacement. This is especially relevant if your vehicle displays a message that indicates the smart or remote keys aren't powered.

It's a fairly simple procedure. In order to replace the battery in the key fob take out the mechanical key from the slit at the back of the key fob. Next, lift the cover. A small screw is found inside the key fob to hold the battery in place. Remove the old battery by unscrewing the screw with a small screwdriver. Insert the new battery and then close the cut on the key fob.

When the key fob is equipped with a fresh battery check it by pressing the locks and unlock buttons. If the doors unlock and lock in the same way, you're set! You can now utilize the hands-free lock/unlock feature on your Kia whenever your fingers feel cold or you need to go on errands around Brandon.

Not all keys may require to be programmed (transponder chips or smart keys). This requires a programming machine that is available only to the locksmith for cars or dealer. Other keys (non-transponder metal keys) don't require programming. If you're required to reprogramme your key, it is necessary to note the key code's number on the tag for the key code.

how to find lost kia key do you replace a dead battery?

If your Kia key fob is not responding to pressing the lock or unlock button on the fob, this is a good indicator that the battery needs to be replaced. A low battery may cause other issues, like the check engine light flashing or the engine not running correctly. It is relatively easy to replace key fob batteries by using only some tools.

Make sure to shut off your vehicle and shut all doors prior to beginning. Locate the small plastic piece on the bottom of your key fob and gently jiggle it until the metal key pops out. This key can be placed inside the driver door handle to unlock your car.

To replace the battery inside the key fob, you must remove the cover on the rear. Use a pry tool to loosen up the latch that holds the black negative cable. Remove the old battery, and then position the new battery to ensure that its "+" side is facing you, and the "-", negative side is facing the fob's electrical contacts. Avoid using excessive force when pushing the new CR2032 into place to avoid damaging or bending the metal contacts.

After you have installed the new battery and turning the key fob off and on in the ignition until the door locks cycle. Then you can test your Kia key fob to check whether it's working again.

How to replace the smart key

You can have a standard keyfob, or a Smart Key depending on the model of kia picanto car key replacement [website] Sportage. The difference between them is that the smart key has an incredibly small key blade that is hidden inside, while the standard fob does not. Both types of key fobs are equipped with a battery inside them which eventually needs to be replaced. Luckily, this is a fairly simple process that will take about two minutes.

Before you get started it is essential to ensure that you are on a level surface with sufficient lighting and that the Kia is off. Remember that the fob has small parts that can fall in the event of a mishap.

The release button for the small size is located on the lower backside. This will be either a circular or rectangular slot. You can open the key fob by pressing the button.

Once the key fob is removed, you can remove the battery that was in it. The new battery is a CR-2032 that can be purchased online or at a local auto parts store. After you've finished you should be able to lock and unlock your vehicle with your key fob, even if the engine isn't running!

How do you replace the mechanical key?

The Kia keyfob is a great convenience which allows us to lock or unlock our car by simply pressing one button. Like any other device it is possible that the Kia key fob can have issues at times. There are methods to troubleshoot these issues and ensure that our key fobs are in good working condition for the long run.

A dead or low-quality battery is one of the most common problems. This can cause the device to cease working or even to stop working intermittently. If this happens then try replacing the battery with a fresh new one.

If this doesn't solve the problem you can try using a standard flat-head screwdriver to break open the casing of the fob's plastic. Be careful not to scratch any internal components or scratch the plastic. When the battery is open, carefully take off the old battery and replace it with a new one.

After the new battery has been put in, close and open the doors with the mechanical key (every kia picanto key fob fob comes with an emergency mechanical key that will fit into the slot). Test the fob to make sure it's functioning correctly. If the key fob not working, contact an authorized locksmith or dealer to solve the problem. To avoid future lockouts, ensure you purchase an emergency key that will work in all of the door and trunk cylinders.