10 Meetups About Windows Replacement You Should Attend

When it's Time for Window Replacement

When old windows no longer enhance your home's architecture, protect it from the elements or filter noise it's time to upgrade windows. What should you do?

There are a lot of things to consider. We'll break down the various factors to help you select the right style, energy consumption and labeling, cost, installation, and cost.

Energy Efficiency

One of the most common reasons homeowners invest in new windows is to save energy. In reality replacing old windows that are drafty can cut heating and cooling costs by as much as 20%. But, some homeowners are disappointed to discover that the energy savings resulting from the windows they have replaced do not offset the initial investment in a long time.

Window performance and operation should be a primary factor for any homeowner who is considering replacing their windows. A window that is not functioning properly can increase home maintenance, energy bills, and also the risk of leaks or air infiltration. If your windows aren't moving up and down, or sliding side-toside as they should they should, you may have to replace them because the frames are warped or swollen from excessive moisture or the lack of sealing.

Another indication that windows need to be replaced is the presence of mold or mildew inside and outside the frame. This is typically an indication of a damaged seal or damaged weather stripping. If these issues aren't taken care of promptly, the resulting mold and mildew can lead to health and safety issues for your family.

Replacement windows for new homes can enhance security for your home as well as curb appeal and value. These benefits are enhanced if windows used in a renovation are energy-efficient as recommended by the National Fenestration Rating Council.

The efficiency of windows is measured by their U-factor. The lower the U-factor, more insulating power the window offers. A good rule of thumb is to search for a U-factor that is less than 0.26. Other than the U-factor aspects to consider when evaluating energy efficiency include frame material and design. Vinyl is a strong low-maintenance option, however it can expand and contract with temperature changes, leading to leaks; wood provides an elegant look and better insulation, but it requires regular maintenance. Aluminum is a lightweight material that is easy to maintain, however it conducts heat quickly and is a poor insulator.

For the best results homeowners should work with an experienced window installation professional to ensure that replacement windows are properly installed. A professional can help you choose the right windows for your home's style and zone, and provide information on resale value and homeowner satisfaction.

Style

New windows will always add value to a home. However, when you begin to think about the styles, types and options available, it can become overwhelming. It's not just about fashion or functionality. The wrong windows could actually reduce the value of the home.

Window contractors use a variety of ways to replace old frames with more energy-efficient ones depending on their state of repair. One is a pocket replacement, where contractors take off the exterior frame but leaves the interior trim and sashes. Another option, usually recommended for older homes or in historic areas with strict requirements for grills or sash packs, is to use a sash pack replacement. These are kits that come with jamb liners made of wood or aluminum, and replacement window locks sash on both the upper and lower halves.

The process of replacing the full frame requires removal of the frame and sash that are currently in place. This is typically recommended when the current windows are damaged to the point that they're beyond repair. Full-frame windows are also recommended when homeowners wish to change the type of window, for instance by replacing double-hungs with sliders or cases.

When buying replacement windows, make sure you choose windows with the NFRC label, which shows the window's energy efficiency rating. The higher the rating is, the more efficient the window.

Before installing your new window, loosen and remove the stops that keep the window in place. Carefully work around the sill of the existing frame to ensure that you don't damage the wood. If required, shim the window. Once the new window is in place then shim the top and bottom edges to ensure a secure fit. Then, apply caulk around the outside edge to seal it.

If your new window doesn't quite fit the opening, you can use foam-rubber backer rod to fill in any gaps that are larger than 1/4 inch (0.64 centimeters). This is a much better option than caulk which can trap moisture, causing mold and wood rot. If you have any gaps that are larger than this, attach 1 in (2.5 cm) furring strips to the sides of your existing frame to raise the height.

Budget

Window replacement is a significant investment however the energy efficiency and increased home comfort it provides makes it worth the initial investment. It can also increase the value of your home and cut down on utility bills. Before you start your project, it's essential to establish a budget to guide your spending decisions. To help you determine an amount, consider your household's energy needs and the type of windows you'd like to install. A reliable contractor can provide you with an understanding of the cost of your windows beyond your own personal goals, and offer suggestions to minimize them.

Window frame materials are among the main factors that affect replacement windows cost. Aluminum and vinyl frames are the cheapest alternatives, whereas wood and composite frames will cost more. Consider the pros and cons of each type of frame to help you determine which one is suitable for your home. Wood windows, for example are more durable, offer better insulation, however they require regular maintenance and are vulnerable to moisture damage. Vinyl and aluminum are both less expensive but they are prone to rusting and don't provide the same level of insulation as wood.

Your window replacement company will offer a variety of installation methods that impact your overall cost. The most labor intensive is a complete replacement of the frame. This involves removing the entire window and replacing it with a brand new model. This approach is typically recommended if the frames are damaged or have rotted. It's also recommended in the case of historical renovation projects. A less costly alternative is called insert window replacement. During this process the existing window's sash and operating hardware are removed, however the exterior trim and siding are left intact. A new window is then placed into the opening and secured, insulated and sealed.

If you're doing the work yourself, you should include the cost of the equipment you need. A tape measure, a waterproof shim and caulk guns are crucial. Be sure to purchase shims of different thicknesses to accommodate the different sizes of your window sills as well as head jambs. You'll need elastomeric sealant fill in any gaps between the casing and frame.

Installation

Windows are available in a variety of sizes and shapes to suit the distinctive design of each home. The options include double-hung, single-hung, sliding bay, bow, casement, circle garden, awning, egress and jalousie windows. These windows are available in many different materials and finishes. Some are also insulated to improve energy efficiency.

Replace your old windows that are inefficient with energy-efficient double-hung windows to save money. The process is quite simple, but the results are well worth it. You will also enjoy the benefits of having a stunning new window.

Remove the screen and sash prior installing the new window. This makes it easier to manipulate the frame and will protect the material. After the window is moved into position, you'll need to apply caulk around both sides of the frame and in the gap, if any, using the caulk recommended for doors and windows.

You can use shims made from plastic or cedar according to your preference and the condition of the frame. This will ensure that the window is placed correctly in the opening. Do not over-shim your window since this could cause water condensation within the frame to accumulate and cause the frame to deteriorate.

Once the window is installed the installer will make sure the frame is level, properly caulked and plumb. Reinstall any interior trim removed to make room for the window. Paint or stain the new window to match the color scheme of your home. Make sure to seal and insulate the jambs, sills and flange on the exterior of your home to further improve the performance of your window.